Skip to content
AI Box Fix

Mitsubishi Mitsubishi Connect / SDA / reviewed 18 Oct 2026

AI Box on Mitsubishi: Android Auto Mode, Power and Firmware

AI box not seen on a Mitsubishi? Switch it to Android Auto and add power. The July 2024 TBox Plus firmware fixed Outlander sound.

What works

Any Mitsubishi whose head unit offers wired CarPlay or Android Auto can take an AI box, the same way it takes a phone. Owners run boxes on the Outlander III, the China-built Outlander IV, the Pajero Sport 3 and the Eclipse Cross, almost all through the Mitsubishi Connect / SDA head unit. If a phone starts CarPlay or Android Auto on your car’s USB port, a box can work there too; if your car has neither, no box will add it, and head unit without CarPlay or Android Auto covers the options.

Owners report these set-ups working:

  • Outlander III: a Carlinkit TBox Plus on a 2018 Outlander with Mitsubishi Connect and Rockford Fosgate audio, and a TBox Ambient 6225 on a 2019 Outlander. See the TBox Plus hub and the TBox Ambient hub.
  • Outlander IV (China-built): one owner says a Carlinkit Ultra 1 “works great”; another owner’s TBox Plus runs well once the car is warm (see the quirks below).
  • Pajero Sport 3: a TBox Ambient 8/128 on a 2017 car, once it was switched to Android Auto mode, and a TBox Plus on a 2019 car after a full recovery and firmware update.
  • Eclipse Cross: an Ottocast Picasou 3, working with the odd reboot.
  • Outlander 2017: an ApplePie UX999 Ultra in CarPlay mode, fed from a separate power source. See the UX999 Rocket hub for the ApplePie family.

Two things run through Mitsubishi reports. The first is the protocol: on Mitsubishi Connect / SDA the head unit often does not see a Carlinkit box at all until the box is switched from CarPlay to Android Auto. The second is power: owners describe the USB port as too weak for a full Android box, so the box restarts or never starts on the car’s port alone.

Known quirks

The box never appears until you switch it to Android Auto mode

What owners saw: on a 2017 Pajero Sport 3, a TBox Ambient 8/128 would not start, even though the owner’s phone ran Android Auto on the same car. On a 2019 Pajero Sport with the SDA Mitsubishi Connect unit, a TBox Plus never connected.

What fixed it: switching the box’s protocol from CarPlay to Android Auto. After the switch the Ambient ran on the 2017 Pajero Sport, one owner reported. The 2019 Pajero Sport owner needed more — a full QFIL recovery and the latest firmware as well — before the car saw his TBox Plus, so on two Pajero Sport 3 cars the box was seen only once it was in Android Auto mode. Switching between CarPlay and Android Auto has the steps, and recovering a TBox Plus or Ambient with QFIL covers the recovery the second owner used.

The box restarts, or never starts, on the car’s USB port alone

What owners saw: the box never starts, or restarts before it connects, when it runs on the Mitsubishi USB port by itself.

What fixed it: feeding the box from a second power source. On a 2017 Outlander a UX999 Ultra runs in CarPlay mode powered from a separate source rather than the car’s USB, one owner reported, and the 2019 Pajero Sport owner above used a powered adapter to stop his TBox Plus rebooting. The simplest form is a Y-cable: the data lead goes to the car’s CarPlay port and the power lead to a second USB port or a 12 V USB adapter in the socket. AI box keeps rebooting has the Y-cable wiring and the full power fix.

Outlander sound floats or crackles, and the usual steps do not help

What owners saw: on a 2018 Outlander with Rockford Fosgate speakers, a TBox Plus 8/128 sounded “floating” in Android Auto mode and crackly in CarPlay mode. The owner tried setting the navigation app’s voice assistant aside, removing assistants, forcing 44.1 kHz and a full reset; none of it helped.

What fixed it: the July 2024 TBox Plus firmware. The owner found the May 2024 build was the glitchy one, while the April and July builds were fine; on the July build the sound was finally normal and GPS locked quickly. That is one owner’s report. Because the standard hot-word and sample-rate steps did nothing here, this is the one to try on Outlander Rockford systems. Check which box you have first (which TBox do I have), then update with FOTA on stable power; a local firmware install is an advanced step. The general sound causes are on crackling or muffled sound and improving sound with 44.1 kHz.

The steering voice button opens the wrong assistant

What owners saw: on a Pajero Sport, the steering-wheel voice button behaves two ways depending on how you press it.

What one owner reported: a short press opens the head unit’s own assistant, and a long press (press and hold) opens the CarPlay or Android Auto assistant on the box. If the car’s assistant keeps answering instead of the box, hold the button rather than tapping it. Steering-wheel voice button opens the wrong assistant covers this on other cars.

Still open on these cars

  • Pajero Sport 2021, TBox Plus — voice messages cut off: when the owner starts recording a voice message in a messaging app, the first ten seconds or so are silent before sound comes through, on every firmware. No fix has been reported.
  • No track or media info on the dash: one Outlander owner found the box passes no media information to the car, only the protocol itself. In CarPlay mode other Mitsubishi owners have had better luck with track data, so trying switching protocol is the place to start.
  • China-built Outlander IV — reboots after a cold start: a TBox Plus restarts a few minutes after power-on when the car has been off a long time (overnight, for instance), then runs fine once the car has warmed up or been restarted. The same owner found that only the bundled Type-A and Type-C cables are detected at all; several third-party cables left the head unit seeing nothing.
  • ASX 2015 with a retrofitted head unit: an owner who fitted a Mitsubishi Connect 8740A001 unit himself, wired to the stock USB through a non-stock adapter, cannot get a TBox Plus or TBox Ambient seen, although a phone connects over CarPlay through the same port both wired and through a cheap adapter. Extra power to the box is the next thing to try.
  • Pajero with a UX999 Rocket: one owner’s UX999 Rocket is not seen on a Pajero that does have CarPlay, while an Ottocast Picasou 3 works on the same car.
  • Eclipse Cross with a Picasou 3: the box works but reboots now and then; owners suggest setting the box’s network type to LTE, with no outcome reported yet.

Before you connect a box

  • Switch to Android Auto first. On Mitsubishi Connect / SDA the head unit often will not see the box in CarPlay mode. If nothing appears, switch the box to Android Auto before you assume it is faulty.
  • Check the port with a phone. If an iPhone or Android phone starts CarPlay or Android Auto on that USB port, a box can work there.
  • Have extra power ready. A Y-cable and a 12 V USB adapter solve most Mitsubishi start-up and restart problems; plan for one before you mount the box out of reach.
  • Keep the bundled cables. On the China-built Outlander IV only the cables that came with the box were detected, so do not rely on a random replacement.
  • Note which firmware worked. Outlander owners found one monthly build glitchy and the next fine, so write down the firmware date (Settings → About) that works for you before any update.

If something breaks

Write down the box model and firmware date (Settings → About), the car model and year, the head unit (Mitsubishi Connect / SDA, or the number on the unit, for example 8740A001), whether the box runs in CarPlay or Android Auto mode, and whether a phone on the same port connects without trouble. For a restart, note how long the box runs before it drops and whether the car had been off a long time. A short video helps.

Send that to the box maker’s support (Carlinkit: [email protected]; Ottocast: [email protected]); how to report a bug has a template. If no box holds a connection and a phone does, the phone’s own CarPlay or Android Auto may be the honest answer; start here covers whether a car suits a box at all.

Parts the fixes above need

  • Product photo from the AliExpress listing: USB Y-cable (second power lead)

    USB Y-cable (second power lead)

    Moves the box's power draw onto a second USB port or a 12 V adapter so the car's data port only carries data. The thick lead goes in the car's data port, the thin one in a charger.

    AliExpress

  • Product photo from the AliExpress listing: 12 V USB car charger (USB-C + USB-A)

    12 V USB car charger (USB-C + USB-A)

    Powers the Y-cable's second lead, or the box itself, from the lighter socket instead of a weak head-unit port.

    AliExpress

Some links above are affiliate links: if you buy through them we may earn a commission at no extra cost to you. It never changes which fix we rank first. Product photos are the sellers' own, from the AliExpress listing. Disclosure.