Skip to content
AI Box Fix

Chinese-market Android head units / reviewed 6 Oct 2026

Head Unit Without CarPlay or Android Auto: Using an AI Box

Head unit with only CarbitLink, EasyConnection or QDLink? Run the AI box through Headunit Reloaded in Android Auto: the setup and fixes owners confirmed.

What works

An AI box needs wired CarPlay or wired Android Auto from the car. Many Chinese-market head units run Android but offer neither. All they have is a phone-mirroring app such as CarbitLink, EasyConnection or QDLink. Owners report this on older Geely Atlas Pro and Tugella units, the Belgee X70, the second-generation GAC GS8, some Changans and a Chinese-market Kia Seltos, and on aftermarket Rockchip units. Plugging a box into one of these does nothing. Owners found that the mirroring app cannot host it either, because the box has no phone screen to mirror.

Owners use two ways in:

  • An Android Auto receiver app on the head unit, with the box switched to Android Auto. Most owners use Headunit Reloaded, a paid app on Google Play. Some use the open-source Headunit Revived (since renamed Open Headunit). This is the route most reports below cover.
  • A Carlinkit CPC200-CCPA adapter with the AutoKit app on the head unit, and the box plugged into the adapter. It works, but it is a second box in the chain, and multitouch on the box stops working through it.

Both need a head unit that lets you install apps, which on many units means its engineering menu or a dealer visit. Check that, and what it does to your warranty, before you buy a box. The Carlinkit TBox Ambient is the box most owners report working this way. TBox Plus, Ultra 1 to 3 and MGears Mstick4 owners run it too.

Known quirks

No CarPlay or Android Auto: Headunit Reloaded and Android Auto mode

What owners saw: a box plugged into a head unit with only CarbitLink or EasyConnection does not connect, whatever the cable.

What fixed it: the Headunit Reloaded app on the head unit, with the box in Android Auto mode Advanced. It worked for 3 of 6 owners who reported trying it.

  1. Install Headunit Reloaded on the head unit and give it the permissions it asks for.
  2. Switch the box to Android Auto: on Carlinkit TBox models, press the recessed mode button for 2–3 seconds until the LED turns blue. Switch the CarPlay / Android Auto protocol has the other methods.
  3. Plug the box into the head unit’s USB port and open the app.
  4. On the first connection, choose to always open the app for this device, so it starts by itself next time.

The three owners it worked for:

  • on a head unit with CarbitLink only, which had been running the box through a CCPA adapter, a TBox Ambient connected straight to the app, started fast and worked well (no sound at first, see below);
  • on an aftermarket Rockchip unit with CarbitLink and EasyConnection, a TBox Ambient connected, but only with an older version of the app;
  • on an Android head unit, a TBox Ambient switched to Android Auto works very well. The owner had tried several boxes and the Ambient was the only one that switched to Android Auto without trouble. Once, after the switch, a message said a certificate was about to expire; it has not come back.

It failed for three. On a Chinese-market Kia Seltos the app brought up Android Auto from a phone, but an Ownice A5HD box would not connect, and the app had to be started by hand inside the head unit’s Android each time. On a Tugella that also has CarPlay, the app saw a TBox Ambient as a connected device, but Android Auto never loaded, and Headunit Revived did no better. On a third head unit the current app version showed only a black screen. An older one started, but with no sound from the box and taps landing next to the icons, and the owner gave up. Two Geely Atlas Pro owners who run this setup are counted on the Geely and Belgee page.

The app shows a black screen or ignores the box: try another version

Owners report both directions. On the Rockchip unit above, only an older version of the app worked. On a GAC GS8 second generation, where the box would start only through a CCPA adapter, updating the app to version 7.2 got the box running without the adapter, with multitouch. That report is counted in enable multitouch. Some owners use localized builds of the app passed around on owner forums. One such build on a Changan filled the head unit’s storage until its cameras and dashcam failed. Stick to the official app, and check free storage after installing.

On a 2021 Geely head unit running Android 5, Headunit Revived hung on the start screen on its default H.265 codec and ran stable on H.264; that report is on the Geely and Belgee page.

No sound from the box: USB media transfer and the app build

What owners saw: with the box running through Headunit Reloaded on a CarbitLink-only head unit, the head unit’s own sound (the radio) cut out when the app started, and the box played nothing. Resetting the box, toggling its Bluetooth and switching protocols did not help. Through the CCPA adapter, sound had been fine.

What fixed it: two changes together Advanced. One owner reported it, and he could not say which of the two did it:

  1. In the head unit’s Android developer options, turn off media transfer over USB.
  2. Replace the localized build of Headunit Reloaded with the English one.
  3. Restart the head unit and test sound from the box.

Clearing the head unit’s cache and restarting it did not help him. Another owner whose sound vanished through the app tried a factory reset of the box and another app version without success; no fix is confirmed for him yet.

TBox Ultra 3: Bluetooth music silent or stalling

What owners saw: a TBox Ultra 3 running through Headunit Reloaded played no sound over Bluetooth. Once it did, music paused or waited up to 40 seconds after every skip or seek.

What fixed it: one owner reported it:

  1. On the box, check the media volume: his was almost at zero, so Bluetooth was working but could not be heard.
  2. In the head unit’s Bluetooth menu, delete the pairing with the box.
  3. Pair again, starting from the box’s Bluetooth settings.

He has had no sound problems since. GPS reception on that box stayed poor, which is a separate issue.

A preinstalled mirroring app grabs the box

On a Belgee X70 running Headunit Reloaded, an MGears Mstick4 started unreliably and sometimes showed a message that a USB device was not supported. Removing the head unit’s preinstalled QDLink app gave clean starts. That report and the steps are on the Geely and Belgee page. If your head unit has CarbitLink, EasyConnection or QDLink and the box starts only some of the time, that app is the first suspect.

A CarPlay adapter in between: it works, but multitouch stops

A CPC200-CCPA adapter with AutoKit is the fallback when the receiver app will not run. On a Chinese-market Nissan Terra, the installer could not get Headunit Reloaded to run, and the owner kept the adapter. A TBox Ultra 2 owner whose Reloaded and Revived setups started only now and then moved to the adapter too, and has had no random drops since. On a Geely head unit with no CarPlay or Android Auto at all, one owner running a CPC200-CCPA adapter with AutoKit got his Carlinkit TBox working through the adapter once he switched the box to Android Auto; owners had expected it to need extra power, and it did not. The cost is multitouch: two owners found it does not pass through the adapter, while it works with the box connected directly through the app. Enable multitouch covers it.

Callers hear an echo

A Belgee X70 owner running a TBox Ambient through Headunit Reloaded reported callers hearing themselves. The developer of a third-party firmware for these boxes replied that echo is a known problem of the app and the box together, with no fix yet. Owners with echo on other setups moved calls to the car’s own Bluetooth; call delay and echo explains why that route is safer.

Before you connect a box

  • Check that the head unit installs apps. If it cannot, an AI box is only an option through a CCPA adapter, or not at all.
  • Switch the box to Android Auto before you plug it in. The head unit cannot show the box in CarPlay mode without an adapter.
  • Keep a second app version in reserve. Owners have needed both an older and a newer version of Headunit Reloaded on different head units.
  • Look for mirroring apps. CarbitLink, EasyConnection or QDLink can compete with the receiver app for the USB device.
  • Set up the box at home if you can. Desktop Head Unit setup at home runs the box from a computer, so the head unit is needed only for the final connection.
  • Know your box. Which TBox do I have shows how to read the model and chip in Settings → About.

If something breaks

Write down the box model and firmware date (Settings → About), the head unit (car model and year, or the unit’s maker and chip), its Android version, which mirroring apps it came with, and the receiver app and its version. Note what you see: a black screen, the device detected but no Android Auto, no sound, or an unreliable start. A short video helps.

Send that to the box maker’s support (Carlinkit: [email protected]; Ottocast: [email protected]); how to report a bug has a template. If the head unit will not install apps and a CCPA adapter is not an option, a box is the wrong tool for that car; start here covers whether a car supports a box at all and how the box families compare.