Skip to content
AI Box Fix

TEYES head unitsReviewed

TEYES Bluetooth: Phone Not Found, No Reconnect or No Sound

Phone can't find a TEYES head unit over Bluetooth, or connects with no sound? Reset Bluetooth in the unit's Bluetooth app, then pair again. CC3 2K.

Illustration: TEYES CC3 2K fitted in a car dashboard at dusk

Quick answer

On a TEYES head unit that the phone's Bluetooth scan does not find, reset the Bluetooth settings in the unit's Bluetooth app and pair the phone again: 3 of 3 TEYES owners got the connection back, one on a CC3 2K. If the phone connects but stays silent, delete the pairing on both sides and pair from scratch.

Symptoms

  • The phone's Bluetooth scan does not list the head unit
  • The phone link will not connect after the unit's Bluetooth was used with another device, such as an OBD adapter, and a restart changes nothing
  • The phone connects when you start the car, but no sound comes out
  • A new phone does not find the unit although your old phone still connects
  • An iPhone does not reconnect by itself, while other phones do
  • You cannot find where Bluetooth is switched on in the unit's menus

Applies to

Head unit
TEYES: CC3 2K
Setup
Phone → TEYES unit
Phone projection
CarPlay and Android Auto
Highest risk on this page
Low risk
Status
Workaround confirmed by the community

Why it happens

Bluetooth is the first link between the phone and a TEYES unit. Wireless CarPlay and Android Auto start there: the phone and the unit find each other over Bluetooth, then the picture moves to Wi-Fi. Hands-free calls and Bluetooth music stay on it. A phone that cannot pair gets none of the three.

On the unit, owners found Bluetooth in an app. They call it the Bluetooth app, BT Phone, or the app that connects the phone. One owner’s new phone would not pair until he did the pairing inside that app.

Two things go wrong in the reports. The unit’s Bluetooth stays set up for an earlier connection, in one case an OBD adapter used with a diagnostics app, and a restart does not clear that. Or the saved pairing on one side stops matching the other: the phone shows as connected and nothing plays.

If Bluetooth pairs and CarPlay or Android Auto still spins on connecting, the fault is further along the chain: see TEYES CarPlay stuck on connecting.

Where is the fault?

Run these checks in order. Each one clears one device, so you only work on the part that fails.

One test per device in the chain between the phone and the car screen
CheckTry thisWhat it tells you
PhonePair the phone with any other Bluetooth device, such as a headset or a speaker.If that fails too, the fault is on the phone and nothing on the unit needs changing yet.
A second phoneTry another phone with the unit.In two reports one phone failed while others connected: a new phone next to an old one, and one iPhone among several phones. When only one phone fails, the unit's Bluetooth works and that phone's pairing is what to redo.
Bluetooth linkOpen the unit's Bluetooth app, leave it on screen and scan for devices on the phone.If the unit appears only now, pair from here (third fix). If it never appears, reset Bluetooth in that app (first fix).
TEYES unitWith the phone shown as connected and no sound, play the radio or a file stored on the unit.If that plays, the amplifier and speakers are fine and the silence belongs to the pairing (second fix).

Not sure what an AI box would add to an Android head unit? See AI box or Android head unit.

Fixes, ranked

Reset Bluetooth in the unit's Bluetooth app, then pair again

  • Low risk
  • Time: 5 minutes
  • Worked for 3 of 3 TEYES owners
  1. On the head unit, open the Bluetooth app from the app list.
  2. Find the reset item and use it. One owner places it at the bottom of the screen; another describes a Reset button.
  3. On the phone, scan for Bluetooth devices and pair with the unit. An owner gave 0000 as the code.
  4. If CarPlay or Android Auto was what failed, start it again.

Three owners got the connection back this way. The first could not get his phone to see the unit at all; after the reset, he wrote, the phone finds the unit as soon as Bluetooth is on. He did not name his model.

The second met the problem while setting up CarLink. The unit’s Bluetooth had been used with an ELM327 OBD adapter and a diagnostics app before that. A restart did not help him; the reset did. His rule since: whenever the unit’s Bluetooth has been set up for another connection, reset it before pairing the phone.

The third, on a CC3 2K, pressed the reset button in what he called the app that connects the phone, and CarPlay and the rest worked afterwards. The three owners word the place differently, and the reports do not say whether it is one screen on every unit: look for a reset item in whichever Bluetooth app your unit has.

No owner said what the reset keeps. Expect to pair other Bluetooth devices, such as an OBD adapter, again afterwards.

Delete the pairing on both sides and pair from scratch

  • Low risk
  • Time: 5 minutes
  • Worked for 2 of 2 TEYES owners
  1. On the phone, open the Bluetooth settings and forget the head unit.
  2. On the head unit, delete the phone from the paired devices in the Bluetooth app.
  3. Pair the two again and enter the code when the phone asks for it.
  4. Play music or make a call to check the sound.

One owner was told by another, who had been through the same, to delete the link on the phone and on the unit. He reported forgetting it on the phone, connecting again and entering the code, and the music played. He mentions the phone side only; clearing both is what the advice said.

A second owner’s phone connects every time he starts the car, with no sound. Cancelling the pairing and pairing again from scratch brings everything back, and he has to repeat it. For him this is a workaround, and nobody in the reports found what makes the silence return.

Pair a new phone from inside the unit's Bluetooth app

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. On the head unit, open the Bluetooth app. One owner calls it BT Phone.
  2. With that app on screen, scan for Bluetooth devices on the new phone and pair with the unit.
  3. Check that the new phone connects, and that the old one still does if you keep using it.

An owner changed phones. The old phone kept connecting; the new one did not find the unit. He assumed the old phone had to be deleted from the unit first and could not find where. Another owner pointed him to the BT Phone app.

He reported back that both phones now work: the pairing had to be done inside the unit’s Bluetooth app. He did not need to delete the old phone. His model is not named.

Unpair the iPhone, restart both devices, pair again

  • Low risk
  • Time: 10 minutes
  • Worked for 1 of 1 TEYES owner
  1. On the iPhone, forget the head unit in the Bluetooth settings.
  2. Restart the iPhone.
  3. Restart the head unit.
  4. Pair the iPhone with the unit again.

An owner wrote that this is what helped him with an iPhone 16. He did not name his unit. He was answering a CC3 2K owner whose iPhone 17 would not connect by itself while every other phone did; that owner has not reported a result yet.

The difference from the second fix is the restart of both devices between deleting the pairing and making the new one.

Things to try (unverified on TEYES)

  • Messenger notifications that do not show or sound on the unit, although calls work. The suggestion was to install the messenger on the unit itself; no TEYES owner reported a result.
  • What AI box owners report. On an AI box the same symptom has its own causes and its own counts, none of which are included here: see phone won’t pair with the AI box, and can’t hear the caller on incoming calls for calls that connect in silence.

If nothing works

Write down the family (CC3 2K, CC4 and so on), the screen size and memory version, the firmware version and the unit’s ID, which owners find under Settings → System. Add the phone model and its system version, which of the fixes you tried, and whether a second phone behaves the same way. A short video of the phone’s Bluetooth list next to the unit’s Bluetooth app says more than a description.

Send that to the store you bought the unit from; the regional store’s support page is the official route. If no phone at all finds the unit after a Bluetooth reset, the fault may be in the unit’s Bluetooth hardware, and that is a warranty question for the seller, not something a setting will cure.

What owners said

“Sorted it, now both work too. I had to go into the Bluetooth program and pair from there.”
Worked: Pair from the unit's Bluetooth app
Owner, Jan 2026
“I deleted the pairing on the phone. Connected again, entered the password, and the music played.”
Worked: Delete the pairing and pair again
Owner, Aug 2024
“I looked through the Bluetooth apps, and in the app for connecting the phone I pressed the Reset button. After that CarPlay and everything else started working.”
Worked: Reset in the unit's Bluetooth app
Owner, TEYES CC3 2K, Nov 2023

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Where is Bluetooth switched on on a TEYES unit?

In an app on the unit. A CC3 2K owner who could not find where Bluetooth is switched on found the controls among the unit's apps, in the one that connects the phone. Other owners call it the Bluetooth app or BT Phone. Pairing and the reset item are there.

What code does the unit ask for when pairing?

An owner gave 0000. The reports do not say whether every TEYES family uses that code, so if the phone rejects it, look for the code in the unit's Bluetooth app.

Does wireless CarPlay or Android Auto need Bluetooth?

For the first step, yes: the phone and the unit find each other over Bluetooth before the picture moves to Wi-Fi. One owner reported that CarPlay and the rest worked after he reset Bluetooth on the unit.

Why is the sound gone again at the next start?

The reports do not say. One owner gets sound back each time he deletes the pairing and pairs again, and has to repeat it; nobody named a cause or a lasting cure.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 7 community reports on TEYES CC3 2K, TEYES head unit (model not stated).
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (4 cases)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-1292TEYES CC3 2K; TEYES head unit (model not stated)3 workedOwner reviews, 6 messages
case-1293TEYES head unit (model not stated)2 workedOwner reviews, 4 messages
case-1294TEYES head unit (model not stated)1 workedOwner reviews, 3 messages
case-1295TEYES head unit (model not stated)1 workedOwner reviews, 2 messages