TEYES head unitsReviewed
TEYES Caller Too Quiet on Hands-Free: Raise the BT Phone Level
Caller barely audible through a TEYES head unit while music is loud? Raise the call volume on the phone mid-call, then the BT PHONE level on the unit.
TEYES CC3 2KTEYES head unit (model not stated)
Quick answer
On a TEYES head unit, a caller who is too quiet on hands-free while music is loud became loud enough for one owner when he pressed the phone's volume-up key during a call. A CC3 2K owner whose phone was already at maximum raised the BT PHONE level in the unit's Factory settings. Each has one TEYES owner behind it.
Symptoms
- On a hands-free call through the TEYES unit the other party is barely audible, even with the unit's volume at maximum
- Music from the same unit is very loud
- The other party hears you well
- The phone's own call volume is already at maximum and the caller is still quiet
Applies to
- Head unit
- TEYES: CC3 2K
- Setup
- Phone → TEYES unit
- Phone projection
- CarPlay and Android Auto
- Highest risk on this page
- Advanced
- Status
- Workaround confirmed by the community
Why it happens
A hands-free call and music are two different kinds of sound, and each has a level of its own. The knob on the unit sets the overall volume. It cannot make up for a call level that is set low somewhere else.
The two owner reports show two such places. One is the phone: it keeps a call volume for the hands-free link, and its volume keys change that level only while a call is running. The other is the unit: its sound balance settings hold a separate level for the Bluetooth phone channel, labelled BT PHONE.
Nobody explained why either level was low to begin with. The CC3 2K owner found his unit that way: music very loud, the caller hard to hear.
Where is the fault?
Run these checks in order. Each one clears one device, so you only work on the part that fails.
| Check | Try this | What it tells you |
|---|---|---|
| The other party | End the Bluetooth connection to the unit and take the same call on the phone itself, with its speaker on. | A caller who is quiet there too is quiet at the source: their phone or the network. Nothing on this page applies. |
| Phone | During a call through the unit, press the phone's volume-up key and watch the volume bar on the phone. | A bar that was low, and a caller who gets louder as it rises, means the phone's call level was the cause: Fix 1. A bar already at the top clears the phone. |
| A second phone | Pair another phone with the unit and make a call from it. | Loud with the second phone: the first phone's call level or settings. Quiet with both: the unit's own phone level, Fix 2. |
| TEYES unit | Play music from the phone over Bluetooth, note where the volume sits, then take a call without touching it. | Music loud and the caller quiet at the same setting is what the CC3 2K owner described before he raised BT PHONE: Fix 2. |
| Projection app | Make one ordinary Bluetooth call and one call inside CarPlay or Android Auto, and compare them. | If only the call inside CarPlay or Android Auto is quiet, neither fix below has an owner report for it. See the unverified items. |
Not sure what an AI box would add to an Android head unit? See AI box or Android head unit.
Fixes, ranked
Raise the call volume on the phone during a call
- Low risk
- Time: 2 minutes
- Worked for 1 of 2 TEYES owners
- Start a call through the head unit.
- While the call is running, pick up the phone.
- Press the phone’s volume-up key until the caller is loud enough.
- On the next call, check that the caller is still loud.
An owner answered the CC3 2K owner’s question by saying he has the same unit and had the same problem. During a call through the unit he took his phone and raised the volume with its volume key, and that solved it. He did not name his phone, and he did not say whether the level stayed for later calls, which is why step 4 is there.
It did not work for the CC3 2K owner who had asked. His phone’s volume was already at maximum, and the caller was still barely audible. If your phone shows a full bar during the call, go to the next fix.
Raise the BT PHONE level in the unit's sound balance settings
- Advanced
- Time: 10 minutes
- Worked for 1 of 1 TEYES owner
Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.
- Open the Factory settings menu on the head unit. It asks for a code.
- Open the sound balance settings.
- Find the rightmost level, labelled BT PHONE, and write down its value.
- Raise it to maximum.
- Leave the menu without changing anything else, then make a test call.
A CC3 2K owner (the 6/128 version, in a Toyota RAV4) could barely hear the other party with the volume at maximum, while he was heard perfectly and music was very loud. The phone’s volume keys did not help him. He opened the Factory settings, went into the sound balance settings, raised the rightmost control to maximum, and reported that everything was fine afterwards.
He typed the label as “BTTHONE”. Read it as BT PHONE, and expect the wording on your screen to differ a little. He described the result loosely, as a solution for the microphone volume, but the complaint he started with was the caller’s voice.
He did not write the code that opens the menu. On the TEYES external microphone page, one TEYES owner reached the same menu with the code 168. That menu holds settings for the whole unit, which is why this fix carries the Advanced label.
One more member replied that he had tried it and that nothing helped. His only other message in that conversation was about the built-in microphone, so his fault may be a different one, and he is not counted.
Things to try (unverified on TEYES)
- In CarPlay the ringtone is far louder than the music. The suggestion was the call-volume setting on the unit. No TEYES owner reported a result.
- Music stays silent after a call in CarPlay. The same call-volume setting was suggested. No TEYES owner reported a result.
- What AI box owners report. On an AI box plugged into a factory screen, quiet voice prompts are set with the car’s volume knob while the voice is speaking: see navigation voice prompts too quiet. Calls with no sound at all are a different fault there: see can’t hear the caller on incoming calls. Those reports are about a different device, and none of them is counted here.
If nothing works
Write down the family of the unit, its screen size and memory version, the unit’s ID from Settings, System, and the firmware version. Add the phone model and its system version, the BT PHONE value you found, whether the phone’s volume bar was full during the call, and whether a second phone behaves the same. How to report a bug lists what makes a report usable.
Send that to the store you bought from; the maker’s regional store has a support page. If the caller stays quiet with two phones and with both levels at maximum, no owner report offers a further setting, and a warranty claim is the honest next step.
If it is the other party who cannot hear you, the fault is on the microphone side: see TEYES external microphone ignored or silent. If calls have no sound in either direction, start with TEYES Bluetooth: phone not found, no reconnect or no sound.
What owners said
“I have the same head unit and had the same problem. It was solved simply: during a call through the unit, I picked up my phone and raised the volume with its rocker key.”
Owner, Nov 2023
“The rocker keys on the phone didn't help, the volume was at max. I went into the factory settings, the sound balance settings, the rightmost control, BT PHONE, and raised it to max. And, a miracle, all fine.”
Owner, TEYES CC3 2K, Nov 2023
Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.
Questions owners ask
Why is music loud on a TEYES unit while the caller is quiet?
Call sound and music are set by different levels. In the two owner reports, one caller became loud once the phone's own call volume was raised during a call, and the other once the BT PHONE level in the unit's sound balance settings was raised. The volume knob alone changed neither.
Where is the BT PHONE level on a TEYES CC3 2K?
The CC3 2K owner found it in the Factory settings menu, inside the sound balance settings, as the rightmost control. He did not write which code he entered to open that menu.
Does this also fix quiet calls in CarPlay or Android Auto?
Unknown. Both reports are about ordinary hands-free calls over Bluetooth. For CarPlay, a call-volume setting on the unit was suggested, and no TEYES owner reported a result.
Related fixes
- Can't Hear the Caller on Incoming Calls Through the AI BoxAdvanced
- Navigation Prompts Too Quiet, Loud or Silent: 13 Owner ReportsLow risk
- TEYES External Microphone Ignored or Silent on CallsAdvanced
- TEYES Bluetooth: Phone Not Found, No Reconnect or No SoundLow risk
- TEYES: Messenger Voice Notes Silent? Start Bluetooth MusicLow risk
- TEYES Shows No Caller Names: Phone Book Does Not SyncLow risk
Did this work for you?
Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.
Send a reportChangelog
- Last reviewed against new community reports:
- Confirmed by 2 community reports on TEYES CC3 2K, TEYES head unit (model not stated).
- Page updated:
"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.
Evidence behind these counts (2 cases)
One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.
| Case | Confirmed on | Result | Source |
|---|---|---|---|
| case-1437 | TEYES head unit (model not stated) | 1 worked, 1 did not | Owner reviews, 1 message |
| case-1438 | TEYES CC3 2K | 1 worked | Owner reviews, 2 messages |