Skip to content
AI Box Fix

TEYES head unitsReviewed

TEYES CarPlay Stuck on Connecting: Wi-Fi Band, USB Port, Re-Pair

CarPlay on a TEYES head unit spins on connecting? Owners fixed it with the 2.4 GHz hotspot band, a re-made connection, or a cable in the unit's own USB.

Illustration: TEYES CC3 2K beside a smartphone in a car

Quick answer

On a TEYES head unit, wireless CarPlay stuck on "connecting" came up for one owner after he changed the unit's Wi-Fi hotspot from 5 GHz to 2.4 GHz in its Android settings. Two other TEYES owners tried it without success: their setting went back to 5 GHz. Re-creating the saved connection and a USB cable each worked for one owner.

Symptoms

  • The CarPlay screen on the TEYES unit shows "connecting" and never moves on
  • The phone is paired over Bluetooth, yet CarPlay does not start
  • CarPlay runs with a USB cable but not wirelessly
  • Wired CarPlay stops at a "no connection with the phone" window
  • You set the unit's hotspot to 2.4 GHz and it is back on 5 GHz the next time you look

Applies to

Head unit
TEYES: CC3 2K, CC4, CC4 Pro
Setup
Phone → TEYES unit
Phone projection
CarPlay
Highest risk on this page
Advanced
Status
Workaround confirmed by the community

Why it happens

A TEYES unit is an Android computer, and CarPlay on it is drawn by a phone-link app that owners mostly call CarLink (how to start CarPlay on a TEYES unit shows where it is). Without a cable, the phone and the unit first find each other over Bluetooth, then the picture and sound travel over the unit’s Wi-Fi hotspot. A screen that stays on “connecting” while Bluetooth is paired means the first step passed and the second never finished.

With a cable there is no Wi-Fi step, and the weak point moves to the socket: owners found that not every USB socket in the car carries CarPlay to the unit.

The reports do not say why one unit wanted 2.4 GHz while another runs on either band, or why a CAN-bus decoder update brought CarPlay back on a CC4. What they show is that the saved connection, the Wi-Fi band and the USB port can each fail alone, so find the failing link before you change anything.

Where is the fault?

Run these checks in order. Each one clears one device, so you only work on the part that fails.

One test per device in the chain between the phone and the car screen
CheckTry thisWhat it tells you
PhonePair a second phone with the unit and start CarPlay from it.If the second phone connects, the unit and its app are fine and the first phone holds a bad saved connection: go to Fix 2.
Phone-link appWith the phone paired over Bluetooth, play music from it through the unit, then open the CarPlay section of the unit's phone-link app.Music that plays while the app still shows connecting clears Bluetooth pairing. The step that fails comes after it.
CablePlug the phone into a USB lead that comes from the unit, with a cable that carries data, and start CarPlay.If wired CarPlay runs, the phone and the app are cleared and the wireless link is at fault. If it does not, try the unit's other USB port before blaming the unit.
Wi-Fi linkChange the hotspot band in the unit's Android settings, restart the unit, then open the same setting again.A band that has returned to 5 GHz by itself means the change does not hold on your unit. Two owners saw that, and the band change did not help either of them.

Not sure what an AI box would add to an Android head unit? See AI box or Android head unit.

Fixes, ranked

Set the unit's hotspot to 2.4 GHz, then restart the unit

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 3 TEYES owners
  1. On the head unit, open the Android settings.
  2. Find the hotspot (access point) settings and open the band option.
  3. Change the band from 5 GHz to 2.4 GHz.
  4. Restart the head unit, then let the phone connect.
  5. Open the hotspot settings once more and check that the band still reads 2.4 GHz.

An owner whose phone sat on an endless “connecting” was pointed to the band setting. He wrote back that it helped and that everything connected.

Two others had no luck. A CC4 Pro owner still saw “connecting” spin, and found the setting back on 5 GHz. A CC4 owner reported the same return to 5 GHz; his CarPlay came back only after Fix 6. If step 5 shows 5 GHz again, this fix is not holding on your unit, and repeating it is unlikely to change that.

Step 4 comes from a fourth owner, who is not counted because he described no fault of his own. He ran CarPlay on both bands and says the band made no difference on his unit: what mattered was restarting the head unit after the change, after which the phone was picked up without any action on it.

AI box owners report the opposite band for a similar symptom: AutoKit stuck on waiting for phone cleared on 5 GHz. Those are reports about AI boxes and prove nothing about a TEYES unit. Read them as a reason to test both bands instead of assuming one.

Delete the saved connection and create it again

  • Low risk
  • Time: 10 minutes
  • Worked for 1 of 1 TEYES owner
  1. On the head unit, delete the saved connection to your phone.
  2. On the phone, delete the saved connection to the head unit as well.
  3. Pair the phone with the unit again over Bluetooth and accept the CarPlay prompts.

An owner tested this with an iPhone XR on iOS 18.7.2. With the default set-up nothing connected. He deleted the connection on the head unit, created it again, and CarPlay ran. Step 2 is what he had advised earlier in the same conversation; he did not say he needed it himself.

Before re-creating the connection he had also installed an iPhone app whose name he gives as “car play connect: sync my auto”. Whether it played any part is unknown, and no other owner mentioned it. Do the three steps without it first.

Connect by USB cable while wireless will not come up

  • Low risk
  • Time: 2 minutes
  • Worked for 1 of 2 TEYES owners
  1. Plug the phone into a USB lead of the head unit with a cable that carries data.
  2. Unlock the phone and accept the CarPlay prompt.
  3. Open CarPlay in the unit’s phone-link app if it does not start by itself.

This is a workaround, not a cure. A CC4 Pro owner whose wireless CarPlay only showed “connecting” was told to try a cable first; wired CarPlay ran, wireless did not work for him at all, and Fix 1 did not hold on his unit. What the cable gives you is CarPlay today and a test result: the phone and the app are in order.

One owner reported the reverse: over USB CarPlay did not work for him and only Wi-Fi did. If a cable does nothing on your unit, the next two fixes are about which socket it is in.

Move the cable to the unit's USB 1 port

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. Find the port the unit numbers USB 1; the unit has more than one USB port.
  2. Plug the phone into it with a cable that carries data.
  3. Start CarPlay.

A CC3 2K owner on current firmware had CarPlay hang on connecting the phone both by cable and wirelessly. By trial he found that wired CarPlay works on his unit in USB 1 and in no other port. Wireless was still unsolved when he reported.

A reply in the same exchange told him to turn hotspot sharing off. He did not say whether he did, so it is not a step here.

Use the unit's own USB lead, not the car's factory socket

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. Unplug the phone from the car’s factory USB socket.
  2. Plug it into the USB lead that comes from the head unit.
  3. If the phone asks what the USB connection is for, choose the data or CarPlay option, not charging only.

An owner answered a question about CarPlay stopping at a window during connection. He had seen the same “no connection with the phone” when his phone was in the car’s original USB socket; on the lead from the head unit it connects.

Step 3 is his recollection of the choices the phone offered, and he said he might be misremembering. He did not name his phone or his unit, and the owner who asked did not report back. Flash drives travel through the same leads and sockets, and what owners found there is on TEYES does not see a USB flash drive.

Ask TEYES support for a CAN-bus decoder update

  • Advanced
  • Time: A few days, most of it waiting for support
  • Worked for 1 of 1 TEYES owner

Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.

  1. Write to the support of the TEYES store you bought from: say that CarPlay does not connect and list what you have already tried.
  2. Ask whether the CAN-bus decoder of your unit has an update, and install the one support sends you, following their instructions.
  3. Open the CAN bus settings on the unit and look for the update function there as well.
  4. Restart the unit and connect the phone again.

A CC4 owner had asked everywhere and tried the band change, which did not hold. He then reached the maker’s support, who sent him an update for the CAN-bus decoder: a part he had not known needed updating. Since then he drives with CarPlay and reports no further trouble.

Nobody explained why the decoder affects CarPlay. He later told another owner with the same symptom to open the CAN bus settings and update from there; that owner did not report a result. Take the update only from the maker’s support or from the unit’s own update function, never from a file another owner passes on.

Things to try (unverified on TEYES)

  • Reset the unit after a firmware update. A CC3 owner whose CarPlay stopped connecting after he updated the unit wrote the same day that the unit has to be reset to its factory state and then works. He worded it as a rule and did not say he had done it, so it is not counted. The only reply had told him to go back to the previous firmware, and no TEYES owner reported a result for that either. A reset erases your apps and settings.
  • CarPlay connects only sometimes, or does not reconnect at start-up. Owners were told to put the phone and the unit on the same Wi-Fi band, to forget the unit in the phone’s CarPlay settings and to restart the unit. No TEYES owner reported a result.
  • Wireless CarPlay lags, stutters or drops while driving. The suggestion was a cable. No TEYES owner with CarPlay reported back. An owner with the same complaint on Android Auto did, and his cable ran well: see TEYES Android Auto not connecting.
  • CarPlay stopped after an iPhone system update. Deleting and re-creating the connection (Fix 2) was suggested. The one confirmation came from a phone on iOS 18.7.2, and no TEYES owner whose CarPlay broke with an update reported a result.
  • The phone will not pair over Bluetooth at all. That is an earlier link in the chain, with its own TEYES reports: see TEYES Bluetooth: phone not found or no reconnect. AI box owners report that deleting the phone on the device and pairing again cleared a Bluetooth connection error (phone won’t pair with the AI box); that is a report about AI boxes, not about a TEYES unit.

If nothing works

Write down the family of the unit, its screen size and memory version, the unit’s ID from Settings → System, the firmware version, the phone model and its system version. Add what you found in the table above: whether a cable works, in which USB port, and whether the hotspot band holds after a restart. A short video of the “connecting” screen helps more than a description, and how to report a bug lists what makes a report usable.

Send that to the TEYES store you bought from; the regional store has a support page. Ask about the CAN-bus decoder in the same message, since that is what ended the fault for one CC4 owner.

If a cable works and wireless never does, wired CarPlay is the honest fallback. A CC4 Pro owner and a CC3 2K owner in these reports were both still on the cable when they wrote.

What owners said

“I had the same situation. […] Nothing helped. […] Then I got through to support: they sent me a CAN bus update, which it turns out also needs updating, and now I drive with CarPlay and all is OK.”
Worked: CAN-bus update from TEYES support
Owner, TEYES CC4, Jun 2026
“Thanks, it helped, I connected everything!”
Worked: Hotspot band changed to 2.4 GHz
Owner, Nov 2025
“By trial and error I found that CarPlay works only in USB 1, by cable. Over Bluetooth I still haven't beaten it.”
Worked: Cable in the unit's USB 1 port
Owner, TEYES CC3 2K, Oct 2023

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Should the TEYES hotspot be on 2.4 GHz or 5 GHz for wireless CarPlay?

The reports disagree. One owner's endless connecting ended on 2.4 GHz. Another says his unit runs CarPlay on either band as long as the unit is restarted after the change. On a CC4 and a CC4 Pro the setting went back to 5 GHz by itself and CarPlay still did not connect.

Wired CarPlay works but wireless never does. What does that tell me?

That the phone and the phone-link app on the unit are set up correctly, and that the fault is in the wireless link. Work on the hotspot band and the saved connection. Two owners in these reports stayed on the cable because wireless never came up for them.

Do I need a helper app on the iPhone?

Nobody showed that you do. One owner installed one before he deleted and re-created the connection, and CarPlay then ran, so the reports cannot tell the two steps apart. Re-create the connection without it first.

Is this page also for Android Auto?

No. The Android Auto reports from TEYES owners point to different fixes, some of them on the phone, and they have a page of their own in the related list.

Parts the fixes above need

  • Product photo from the AliExpress listing: USB-A to Lightning data cable

    USB-A to Lightning data cable

    For wired CarPlay with an iPhone 14 or older: a cable that carries data, between the phone and one of the unit's USB leads.

    AliExpress

  • Product photo from the AliExpress listing: USB data cable for the phone (USB-C)

    USB data cable for the phone (USB-C)

    For wired Android Auto or CarPlay on a head unit: a cable that carries data, between the phone and one of the unit's USB leads. Pick the end that fits the lead. iPhone 15 and later use USB-C.

    AliExpress (USB-A to USB-C)AliExpress (USB-C to USB-C)

Some links above are affiliate links: if you buy through them we may earn a commission at no extra cost to you. It never changes which fix we rank first. Product photos are the sellers' own, from the AliExpress listing. Disclosure.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 6 community reports on TEYES head unit (model not stated), TEYES CC4 Pro, TEYES CC3 2K, TEYES CC4.
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (6 cases)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-1232TEYES head unit (model not stated)1 worked, 2 did notOwner reviews, 4 messages
case-1233TEYES head unit (model not stated)1 workedOwner reviews, 2 messages
case-1234TEYES CC4 Pro1 worked, 1 did notOwner reviews, 2 messages
case-1235TEYES CC3 2K1 workedOwner reviews, 3 messages
case-1236TEYES head unit (model not stated)1 workedOwner reviews, 2 messages
case-1237TEYES CC41 workedOwner reviews, 2 messages