Skip to content
AI Box Fix

TEYES head unitsReviewed

TEYES CC4 Won't Pair a DSP Over Bluetooth: Set Its PIN to 1234

TEYES CC4 shows a pairing error for a DSP's Bluetooth module before any PIN can be typed? Set the DSP's password back to the default 1234 and pair again.

Illustration: TEYES CC4 on a workbench before installation

Quick answer

On a TEYES CC4 that refuses to pair with the Bluetooth control module of a DSP audio processor and shows an error before any PIN can be typed, set the DSP's Bluetooth password back to its default, 1234, and pair again. 2 of 2 TEYES owners connected that way, and for one the unit paired at once.

Symptoms

  • Pairing the DSP's Bluetooth module from the TEYES unit ends in an error straight away
  • The unit never shows a field where the PIN could be typed
  • The DSP's Bluetooth password was changed from its default at some point

Applies to

Head unit
TEYES: CC4
Setup
Phone → TEYES unit
Phone projection
CarPlay and Android Auto
Highest risk on this page
Low risk
Status
Workaround confirmed by the community

Why it happens

An aftermarket DSP audio processor, or an amplifier with a DSP built in, is tuned from an app that talks to it over Bluetooth. The DSP’s Bluetooth module is protected by a password, the PIN a device has to give when it pairs.

A phone asks you for that PIN. On a CC4, one owner found that the head unit does not: it showed an error at once and never offered a field to type anything. He took it as a sign that the CC4’s Bluetooth is as cut down as the CC3’s.

A second owner supplied the missing piece. His DSP’s password had been changed from the factory value; once it was 1234 again, the unit connected at once. The two reports fit a unit that offers a PIN by itself, without asking, and gets through only when the DSP still expects 1234. That is a reading of two reports. The maker does not document it.

Where is the fault?

Run these checks in order. Each one clears one device, so you only work on the part that fails.

One test per device in the chain between the phone and the car screen
CheckTry thisWhat it tells you
DSPPair the DSP's Bluetooth module with a phone and type the PIN you believe it has.If the phone connects, the module works and you know its current PIN. If the phone cannot pair either, the fault is on the DSP side and nothing on the head unit needs changing.
DSP passwordOpen the DSP's own setup software and read its Bluetooth password.Any value other than the default is what the fix below changes. If it already is 1234 and the unit still shows the error, the two owner reports do not cover your case.
Pairing screenStart the pairing from the head unit and watch whether a PIN field appears before the error.An error with no field is what the CC4 owner described. If your unit does show a field, type the DSP's PIN there; this page is about the unit that never asks.
TEYES unitPair your phone with the head unit over Bluetooth.If the phone pairs, the unit's Bluetooth works and the refusal concerns this one device. If no phone pairs, start with the unit's own Bluetooth instead.

Not sure what an AI box would add to an Android head unit? See AI box or Android head unit.

Fixes, ranked

Set the DSP's Bluetooth password back to 1234, then pair again

  • Low risk
  • Time: 10 minutes
  • Worked for 2 of 2 TEYES owners
  1. Open the DSP’s own setup software and find its Bluetooth password. The reports do not say where that setting is; use whichever app or program you tune the DSP with.
  2. If the password was changed, set it back to the default. For the DSP both owners had, that is 1234.
  3. On the head unit, start the pairing with the DSP again.
  4. Check that the unit now lists the DSP as connected.

The owner who gave the advice had been through it himself. He asked whether the password had been changed from 1234, said to change it back and try again, and added that this is how it worked for him: with the password at 1234 again, the head unit connected at once. He did not name his unit.

The CC4 owner, who had bought his unit the day before, replied that he had connected it. He gave no detail of what he changed. He is counted because his reply answers that advice.

Two things follow from the default. It belongs to that make of DSP: if yours shipped with another value, look it up in the manual, and note that no TEYES owner reported on any value but 1234. And a default password is known to everybody who owns the same make, which is the price of this fix.

The code 0000 that an owner gave on the TEYES Bluetooth pairing page is a different thing. It is what a phone is asked for when it pairs with the unit, not what the unit gives to a device it connects to.

Things to try (unverified on TEYES)

  • What AI box owners report. On an AI box plugged into a factory screen, pairing errors have other causes and other fixes: see phone won’t pair with the AI box. Those reports are about a different device, and none is counted here.

If nothing works

Write down the family of the head unit and its firmware version, the make and model of the DSP, the password it is set to now, the exact wording of the error, and whether a phone pairs with the DSP. How to report a bug lists what makes a report usable.

The pairing refusal is a question for the store that sold the head unit; the maker’s regional store has a support page. The password and its default are a question for the DSP’s maker.

Until one of them answers, the DSP can still be tuned from the phone or computer you set it up with. The head unit is one more way to reach it, not the only one.

What owners said

“It worked for me that way: after I set the password back to 1234, the head unit connected straight away.”
Worked: DSP Bluetooth password back to 1234
Owner, Oct 2025
“Thanks! Connected!”
Worked: DSP Bluetooth password back to 1234
Owner, TEYES CC4, Oct 2025

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Can I type a PIN when pairing a Bluetooth device from a TEYES CC4?

The CC4 owner who reported this saw no field for it: the unit showed an error straight away. Pairing went through once the DSP's password was back at its default, 1234.

What is the default Bluetooth password of a DSP?

For the make of DSP processor both TEYES owners had, it is 1234. Other makes may use another value, and no TEYES owner reported on one. The DSP's manual gives its default.

Does this work for other Bluetooth accessories that have a PIN?

The two reports cover one make of DSP processor only. No TEYES owner reported the same change on another kind of accessory, so treat it as untested there.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 2 community reports on TEYES CC4, TEYES head unit (model not stated).
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (1 case)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-1519TEYES CC4; TEYES head unit (model not stated)2 workedOwner reviews, 3 messages