Apps & launchersReviewed
Settings or Factory Settings Won't Open After an Update
Carlinkit TBox Settings crashes or Factory settings opens a ratio picker after an update? Use the new Settings icon, open it full screen, or reset.
Carlinkit TBox PlusCarlinkit TBox AmbientCarlinkit TBox Ultra 2
Quick answer
When Settings or Factory settings crashes on a Carlinkit TBox Ambient or Plus after a firmware update, a factory reset from Settings → More → System fixed it for three owners. Before resetting, look for a second, new Settings icon: opening it fixed the problem for two owners. On a TBox Ultra 2, open Factory settings inside Settings, full screen.
Symptoms
- Settings closes as soon as you tap something in it, for example a style
- Opening Factory settings crashes the app after a firmware update
- Two Settings icons with different designs appear on the home screen
- The engineering menu where you type 4545 is gone after the update
- Every tap in Settings jumps back a page, and after a few tries an error appears
- A home-screen icon called Factory settings shows only an aspect-ratio choice, then closes to the home screen
Applies to
- Connection to the car
- CarPlay and Android Auto
- Highest risk on this page
- Advanced
- Status
- Workaround confirmed by the community
Why it happens
Carlinkit has replaced the TBox’s Settings app on newer builds. After an update the old Settings shortcut can stay on the home screen next to the new one, and the old app crashes as soon as you use it. Leftover data from the previous firmware can break the new Settings app in the same way, and a factory reset clears it.
On recent builds there is a second trap. A new app with a name like Factory settings belongs to the firmware’s split-screen feature, so it shows a ratio picker instead of the code prompt. The real Factory settings menu is still inside the Settings app, and it misbehaves if Settings is opened in a split-screen window.
Fixes, ranked
Factory reset from Settings, then set the box up again
- Low risk
- Time: 1 hour including setup
- Worked for 3 of 3 reports
- Write down your apps, the accounts you will sign in to again, and any hidden settings you changed, such as a start-up delay or a removed navigation bar.
- Open Settings → More → System → Reset → Erase all data.
- Confirm and wait for the box to restart.
- Set the box up again and reinstall your apps.
A TBox Ambient owner updated to the latest build from a microSD card in September 2024, and the Factory settings screen crashed every time. After a factory reset, Settings worked again. Another Ambient owner installed the November 2025 stock build after running a third-party firmware and found two Settings icons, one left over from each firmware; he reset the box and everything ran normally. A TBox Plus owner whose engineering menu had vanished after an update, with the box refusing him access, reset it and the menu opened again in the new Settings layout.
The reset keeps the apps that came with the box but erases their data, the apps you installed and all settings. If Settings will not open far enough to reach the reset entry, use one of the methods in factory reset an AI box without Settings.
Open the second, new Settings icon
- Low risk
- Time: 5 minutes
- Worked for 2 of 2 reports
- Swipe through every home-screen page and look for a second Settings icon.
- Open the new one and give it a moment: it can take a while to start the first time.
- Restart the box.
- Use the one Settings icon that remains.
An owner who updated from the 25 Apr to the 19 Jun 2024 Carlinkit build had Settings closing the moment he chose a style. A second Settings icon had appeared on the second home-screen page; opening it made everything work, and one of the two icons disappeared. Settings then opened in the new layout from the first icon too.
A TBox Ambient owner whose engineering menu (code 4545) had disappeared after an update found that almost every icon on the home screen had been doubled, Settings included. One Settings icon opened the old menu and the other the new one, and with that the problem was solved without the reset he had been dreading.
A long-time community member gave the same steps to two Ambient owners with the same crash, and added the restart: after it, the old icon should be gone. Neither of them reported back, so they are not counted here.
Clear the cache of both Settings apps
- Low risk
- Time: 5 minutes
- Worked for 1 of 1 report
- Open the Android app list, for example Settings → Apps, and show system apps if they are hidden.
- Find the apps called Settings. After the new interface arrives there are two.
- Open each one → Storage → Clear cache.
- Open Settings again.
A TBox Ambient 6225 owner installed the newest build in July 2025 and could do almost nothing in Settings: each tap jumped back a page, and after a few tries an error appeared. Another owner who had been through the same switch to the new interface told him to clear the cache of both Settings apps, and that fixed it. Clearing the cache keeps your apps and settings, so try it before a reset.
TBox Ultra 2: open Factory settings inside Settings, full screen
- Advanced
- Time: 2 minutes
- Worked for 1 of 1 report
Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.
- Leave the new home-screen icon called Factory settings alone: it is the split-screen ratio picker.
- Tap the dots button at the bottom left of the screen to open the app list.
- Open Settings so that it fills the whole screen, not inside a split-screen window.
- Go to Other → Factory settings. The number pad for the engineering code appears.
A TBox Ultra 2 owner who had installed a patched stock build and CarCar Launcher kept getting a ratio choice from Factory settings; picking a ratio closed it, and the next tap showed the same choice. The icon he was tapping was new, with a similar name. Once he opened the menu inside Settings, it worked. Another owner ran into the same effect when he opened Settings in a split-screen window.
The codes you can type on that number pad, and what each one changes, are on the engineering codes page. For what the ratio picker is for, see split screen on a Carlinkit TBox.
Things to try (unverified)
- Clear all recent apps. One owner suggested closing every open app from the floating button’s recent-apps view, so that Settings starts fresh in its new version. It did not help the one owner who tried it; the second icon did.
- Reinstall your previous build. Owners note that you can go back to an older official build with the local FOTA update. Nobody with this problem reported doing it.
If nothing works
If neither Settings icon opens and a reset from the menu is out of reach, reset the box with a card file as described in factory reset an AI box without Settings. If the box shows nothing at all on the car screen after the update, check box seems dead after an update first.
Note the box model and the firmware date before and after the update, the icon you tapped and what it showed, and take a short video. Send it to Carlinkit support at [email protected] and check other owners’ reports for that build on the firmware tracker. If the crash survives a reset on every build, a warranty claim or a replacement is the honest answer; start here compares the box families.
What owners said
“Clearing the Settings cache helped! Thanks.”
Owner, Carlinkit TBox Ambient, Jul 2025
“I factory reset the Ambient... set it up again, more or less. […] Settings worked after the reset.”
Owner, Carlinkit TBox Ambient, Sep 2024
“That closing didn't help... the point is that another Settings icon appeared on the second home-screen page! Launch it and everything works, one of the icons disappears, and Settings opens in the new layout...”
Owner, Jul 2024
Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.
Questions owners ask
Why are there two Settings icons after the update?
Newer Carlinkit builds come with a new Settings app, and the old shortcut can stay on the home screen beside it. The old one crashes on the new system. Open the new one once, restart the box, and the old icon should disappear.
Does a factory reset delete the apps that came with the box?
No. Preinstalled apps stay, but their data is erased, and so are the apps you installed yourself and all your settings.
The Factory settings icon only asks me for a screen ratio. Is my box broken?
No. On recent builds that icon belongs to the split-screen feature. The engineering menu that asks for a code is inside the Settings app, under Other → Factory settings.
Related fixes
Did this work for you?
Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.
Send a reportChangelog
- Last reviewed against new community reports:
- Confirmed by 7 community reports on Carlinkit TBox Ambient, Carlinkit TBox Ultra 2, Carlinkit TBox Plus.
- Page updated:
"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.
Evidence behind these counts (6 cases)
One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.
| Case | Confirmed on | Result | Source |
|---|---|---|---|
| case-8870 | Model not stated | 1 worked | Owner discussion threads, 8 messages |
| case-8871 | Carlinkit TBox Ultra 2 | 1 worked | Owner discussion threads, 8 messages |
| case-8872 | Carlinkit TBox Ambient | 2 worked | Owner discussion threads, 6 messages |
| case-7100 | Carlinkit TBox Ambient | 1 worked | Owner discussion threads, 4 messages |
| case-7101 | Carlinkit TBox Plus | 1 worked | Owner discussion threads, 2 messages |
| case-7102 | Carlinkit TBox Ambient | 1 worked | Owner discussion threads, 2 messages |