Skip to content
AI Box Fix

TEYES head unitsReviewed

TEYES Shows No Caller Names: Phone Book Does Not Sync

No caller names and an empty phone book on a TEYES head unit? Pair again, then press the download button in the unit's Bluetooth app. CC3L.

Illustration: TEYES CC3L close-up in a car dashboard

Quick answer

On a TEYES head unit that shows no caller names and an empty phone book, delete the Bluetooth pairing, pair again, then press the download button in the address book of the unit's Bluetooth app: the phone then asks for contact access. That worked for one CC3L owner. A second TEYES owner keeps his contacts on the unit instead.

Before you start

  • A TEYES head unit; the report behind the first step names the CC3L
  • A phone that already pairs with the unit over Bluetooth
  • For the second step: a USB flash drive and a Google account that is not the one on the phone

Time: about 10 minutes.

Applies to

Head unit
TEYES: CC3L
Setup
Phone → TEYES unit
Phone projection
CarPlay and Android Auto
Highest risk on this page
Low risk

Why is the phone book empty?

A TEYES unit has no contacts of its own. Its Bluetooth app copies them from the phone, and the phone hands them over only when contact access is allowed for that pairing. Without the copy, the unit has a number and no name to put to it.

A CC3L owner found the gap on the phone. In its Bluetooth settings the unit was connected for calls, audio and message access, and contact access was not in the list at all. Pressing the download button on the unit brought up nothing on the phone.

This page starts from a phone that pairs and makes calls. If the phone is not found or will not reconnect, begin with TEYES Bluetooth: phone not found, no reconnect or no sound.

Steps

Pair again, then download the phone book in the unit's Bluetooth app

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. On the phone, open the Bluetooth settings and look at the entry for the TEYES unit. Note what it is connected for: calls, audio, messages, contacts.
  2. Delete the pairing: forget the unit on the phone, and remove the phone from the unit’s Bluetooth app if it is still listed there.
  3. Pair the phone with the unit again.
  4. On the unit, open the Bluetooth app and go to the address book section.
  5. Press the download button, the icon with an arrow pointing down.
  6. Accept the request to share contacts that appears on the phone.

The CC3L owner solved it this way and described the order himself: he reset the pairing, forgot it, connected again, and then pressed the download button in the address book section. Only then did the request appear on the phone. Before the pairing was reset, the same button produced no request.

He wrote that he reset the pairing and forgot it, without saying on which device he did each. Step 2 clears both sides so that it covers either reading. He did not name his phone.

Or keep the contacts on the unit, in Google's Phone app

  • Low risk
  • Time: 30 minutes
  • Worked for 1 of 1 TEYES owner
  1. Sign the unit in to a Google account that is not the one on your phone.
  2. Install Google’s dialer, the app named Phone, on the unit.
  3. On the phone, export the contacts to a file and copy the file to a USB flash drive.
  4. Plug the drive into the unit and import the file in the Phone app.
  5. Leave the phone paired with the unit over Bluetooth for the calls themselves.

A TEYES owner answered “it does not see who is calling, there are no contacts in the book” with his own setup. He made a separate Google account for the unit, installed the dialer and put his contacts into it. In his words the unit sees everything and works without glitches.

He gave two caveats. The surname is shown in very small type, so he still glances at the phone to see who is calling. And he warns against using one Google account on the phone and the unit: syncing on the unit deletes the contacts on both, and cancelling the sync does not always help.

His phone stays paired over Bluetooth, because that is the only way his calls work in both directions. He adds that many owners who call through a SIM card in the unit, without the phone, get one-way sound.

The report says to download the dialer and does not say from where; the app store on the unit is the place to look. He did not name his unit. The owner who had asked has not reported a result.

Verify it worked

Open the address book in the unit’s Bluetooth app after the first step, or the contact list of the Phone app after the second: your contacts should be listed by name. Then ask someone in your contacts to call you while the phone is connected, and watch for the name on the unit’s screen.

On the phone, the Bluetooth entry for the unit should now show contact access next to calls and audio.

Undo / rollback

After the first step, switch contact access off again in the phone’s Bluetooth entry for the unit, or delete the pairing. The unit then stops receiving the phone book.

After the second step, delete the imported contacts in the Phone app, remove the app from the unit’s app settings, and sign the unit out of the Google account you added for it. Delete the contact file from the flash drive: it holds every number you exported.

Troubleshooting this guide

The download button does nothing and the phone shows no request. That is what the CC3L owner saw before he deleted the pairing. Go through step 2 of the first block on both devices, then pair again before pressing the button.

The phone cannot be paired again. Pairing faults have their own page: TEYES Bluetooth: phone not found, no reconnect or no sound.

The contacts loaded and then vanished after an update of the unit. That is one of the faults listed on TEYES factory reset: which faults it cleared for owners. Read what a reset erases before you use it.

Contacts disappeared from the phone as well. The owner in the second block describes that outcome for a phone and a unit signed in to one Google account. Use a separate account on the unit.

The unit does not see the flash drive. See TEYES does not see a USB flash drive.

Names show, but the caller is hard to hear. That is a volume level, not the phone book: see TEYES caller too quiet on hands-free.

Things to try (unverified on TEYES)

  • Switch contact access on without pairing again. If the phone’s Bluetooth entry for the unit offers a switch for contacts, turning it on is the smaller step. No TEYES owner reported that it was enough: the CC3L owner’s phone did not list contact access until he had paired again.
  • Phone notifications and messenger chats do not show on the unit. The suggestion was to install the messenger on the head unit itself. No TEYES owner reported a result.
  • What AI box owners report. Deleting the phone and pairing it again also cleared a Bluetooth error on an AI box plugged into a factory screen: see phone won’t pair with the box. Those reports are about a different device, and none of them is counted here.

What owners said

“I solved it like this: reset the pairing, forgot it and connected again, then went into the Bluetooth app, opened the address book section and pressed the download button (down-arrow icon); then a sync request appeared on the phone.”
Worked: Re-pair, then download the phone book
Owner, TEYES CC3L, Jan 2024
“So I set up a separate Google account. Downloaded the dialer and put the contacts there. It sees everything, everything works without glitches.”
Worked: Contacts in Google's Phone app on the unit
Owner, Jan 2024

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Why does the phone not ask to share contacts with the TEYES unit?

In the CC3L owner's report the pairing had been saved without contact access: the phone listed the unit for calls, audio and message access only, and the download button on the unit produced no request. After he deleted the pairing and paired again, the same button brought the request up.

Can the TEYES unit use the same Google account as the phone?

The owner who keeps his contacts on the unit advises against it. He says that syncing on the unit deletes the contacts on both devices and that cancelling the sync does not always help, so he made a separate account for the unit.

Which TEYES family are these steps confirmed on?

The first step comes from a CC3L owner. The owner behind the second step did not name his unit. Each step has one TEYES owner behind it.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 2 community reports on TEYES CC3L, TEYES head unit (model not stated).
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (2 cases)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-1579TEYES CC3L1 workedOwner reviews, 3 messages
case-1580TEYES head unit (model not stated)1 workedOwner reviews, 2 messages