Apps & launchersReviewed
CarCar Launcher Presets: Keep the Split Ratio, Scale and Dock
CarCar Launcher presets reset the split ratio, app scale or clock after a reboot? Set each preset through its own gear. Carlinkit TBox, Ottocast Picasou.
Carlinkit TBox PlusCarlinkit TBox AmbientCarlinkit TBox UHDCarlinkit TBox UltraCarlinkit TBox Ultra 2Carlinkit TBox Ultra 3Carlinkit TBox Ultra 4Ottocast Picasou 3
Quick answer
On a Carlinkit TBox or Ottocast Picasou running CarCar Launcher, a split preset that reopens at 50/50 instead of your set ratio keeps it only when you set the ratio through that preset's own gear and then tap the preset to run it. Eight owners confirmed that the gear is where the ratio, app scale and the dock are saved.
Before you start
- A box running CarCar Launcher, set as the default home app
- At least one split preset created in the launcher
Time: about 10 minutes.
Applies to
- Devices
- Connection to the car
- CarPlay and Android Auto
- Highest risk on this page
- Low risk
Why a preset resets
A CarCar split preset stores its layout in one place: the gear icon that belongs to that preset. Set the ratio, the app scale or the window sizes anywhere else, and the launcher does not keep them. The preset then reopens at 50/50, at 100 scale, or back to its old sizes after a reboot or when you switch presets.
This catches owners who change the split from the running screen, or who think the home-screen panes work like the stock Carlinkit split. They do not: CarCar’s presets are saved objects, and each one has to be edited through its own gear. Do that, save, and run the preset once, and the layout sticks.
The steps below are all normal launcher settings, so this guide is Safe: you are not entering any engineering code. If the launcher itself is not opening at boot, or the stock side bar keeps fighting it, fix that first in launcher not opening at boot and stuck on “Loading phone”.
Steps
Open the preset's own editor, then set its size
- Low risk
- Time: 2 minutes
- Worked for 2 of 2 reports
- Long-press an empty area of the home screen, not the squares icon at the bottom.
- Tap the gear next to the preset you want to change.
- Drag the divider to set how large each of the two windows is, for example a smaller music pane and a larger navigation pane.
- Save, then tap the saved preset once so it starts at the new size.
The gear next to each preset is where every change is kept. One owner who wanted the music window smaller and the navigation window larger could not find the setting in the menus; long-pressing the empty area, opening the gear, dragging and saving, then tapping the preset to run it, did it. Another owner whose preset tiles had vanished from the side panel after installing the launcher was first pointed at the squares icon at the bottom, which only shows running apps; a second owner corrected him to long-press the empty space above it, and the editor came back.
Make the split ratio survive a reboot
- Low risk
- Time: 2 minutes
- Worked for 3 of 3 reports
- Long-press the empty area and tap the gear next to the preset.
- Choose the split ratio first (for example 70/30), then add one app to each window. Picking the ratio after the apps can drop the apps on some screens.
- Check the value under the preview reads the ratio you chose, not 50/50.
- Save, then tap the saved preset once so it starts with the new ratio.
An Ottocast Picasou 3 owner whose 65/35 split went back to 50/50 at every boot had been editing it without the gear; doing it through the gear on the preset icon kept the ratio. Another owner set 70/30 in every preset and watched each one fall back to 50/50 when he switched between them, until he configured each preset through its gear. A third, on a tall portrait screen, found that tapping the gear deleted his apps, so he chose the ratio first and then added the apps, and it held.
One owner reported the opposite: a preset saved when he first created it, but editing it later would not save. If an edit will not stick, delete the preset and create it again from scratch rather than editing in place.
Keep the app scale from resetting to 100
- Low risk
- Time: 3 minutes
- Worked for 2 of 2 reports
- Long-press the empty area and tap the gear next to the preset.
- Set the zoom for each window, then save inside the widget dialog.
- Save the preset itself, a second save on the left.
- Check the number under the preview reads your value, for example 125/75, not 100.
- If it still resets, delete the preset and create it again from scratch.
The scale has to be stored twice: once in the widget dialog where you set it, and again in the preset. One owner whose window scale returned to 100 after each reboot was told to watch for both saves and to check that the figure under the preview matched what he had dragged to, such as 125/75 rather than 100; recreating the preset fixed it for good. Another owner whose app scale reset to the default at every start had been setting it without opening the gear first, and tapping the gear next to the preset before changing the scale kept it.
Keep the clock and dock when navigation runs full screen
- Low risk
- Time: 1 minute
- Worked for 1 of 1 report
- Open CarCar Launcher’s settings.
- Turn on Dock always on screen.
- Open your navigation app again. It now runs inside the launcher, with the dock and its clock still shown.
One owner had no clock on screen while a navigation app ran full screen, although every other app showed one. Turning on the launcher’s Dock always on screen setting made the navigation app open inside the launcher instead of covering the whole screen, so the dock and its clock stayed visible, and he confirmed it worked.
Verify it worked
- Reboot the box in the car and open the preset. The ratio and scale should be exactly what you set, not 50/50 or 100.
- Switch to another preset and back. The first preset should still open at its own ratio.
- If you use full-screen navigation, confirm the dock and clock are still there.
If a preset still opens wrong after a reboot, the layout was not saved through the gear; repeat the step for the setting that drifted.
Undo / rollback
Nothing here is risky to undo. To change a preset back, open its gear again, set the ratio, scale or sizes you want, save and run it once. To remove a preset you no longer use, long-press it and delete it in the editor.
Before a launcher update, note that moving between the beta and stable channels resets every preset, widget and scale. Photograph your presets first; the detail is in install, update or roll back CarCar Launcher.
Troubleshooting this guide
The preset still slips to 50/50 now and then, even set through the gear. A few owners report a preset that starts correctly most of the time but occasionally comes up at 50/50 on a cold boot. There is no confirmed cure; recreating the preset from scratch, rather than editing the old one, helped some. Report it to the launcher’s developer with your launcher version.
There are no preset tiles and no gear. You may be on a build without the preset bar, or the launcher may not be the default home app. Long-press the empty area of the home screen first; if nothing appears, confirm the launcher is set as the default and see launcher not opening at boot.
The option to change icon size or other extras is missing. Some preset and launcher extras, such as changing the app icon size, are only in the beta channel and some are paid features. Switching the update channel is covered in install, update or roll back CarCar Launcher; do not install launcher files from unknown sources.
You want two apps side by side but do not use CarCar. The box’s own split, with code 121212 and the floating button, is a separate route described in split screen on Carlinkit. For other launcher faults, start at the apps and launchers hub.
What owners said
“Yes, it helped. You need to tap the gear on the icon and only then edit the presets.”
Owner, Ottocast Picasou 3, Jul 2025
“When I tapped the gear, my apps got removed, maybe because of the vertical screen. I've figured it out now: I chose the ratio first, then the apps.”
Owner, May 2025
“I recreated the preset and everything worked.”
Owner, Apr 2024
Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.
Questions owners ask
Why does my preset keep opening at 50/50 even though I set 70/30?
The ratio was not saved through the preset's own gear. Open the gear next to that preset, set the ratio there, save, and tap the preset once to run it. A ratio changed any other way is not stored.
Where is the preset editor if there are no preset tiles?
Long-press an empty area of the home screen, not the squares icon at the bottom, then tap the gear next to the preset. The squares open the running-apps view instead.
Can I edit an existing preset, or must I recreate it?
The gear works for most owners. One owner found edits to an existing preset would not save and had to delete and recreate it, so try the gear first and recreate only if the change will not stick.
Do preset ratios survive a launcher update?
Not always. Moving between the beta and stable channels resets presets, widgets and scale. Photograph them first; see install, update or roll back CarCar Launcher.
Related fixes
- Split Screen on Carlinkit: Widgets vs Real SplitAdvanced
- Install, Update or Roll Back CarCar LauncherLow risk
- Stuck on "Loading Phone" After Installing a LauncherAdvanced
- Launcher or App Doesn't Open When the Box StartsLow risk
- YouTube Audio Out of Sync With the Video: Fixes That WorkedAdvanced
- Poweramp Equalizer Only Works With One App on an AI BoxAdvanced
Did this work for you?
Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.
Send a reportChangelog
- Last reviewed against new community reports:
- Confirmed by 8 community reports on Ottocast Picasou 3.
- Page updated:
"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.
Evidence behind these counts (4 cases)
One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.
| Case | Confirmed on | Result | Source |
|---|---|---|---|
| case-1218 | Ottocast Picasou 3 | 3 worked | Owner discussion threads, 7 messages |
| case-1219 | Model not stated | 2 worked | Owner discussion threads, 4 messages |
| case-1220 | Model not stated | 2 worked | Owner discussion threads, 4 messages |
| case-1221 | Model not stated | 1 worked | Owner discussion threads, 2 messages |