Skip to content
AI Box Fix

Firmware & recoveryReviewed

ApplePie or Ottocast Update Prompt Missing? Insert the Card Live

UX999 Rocket, Ultra or Picasou 3 shows no update prompt from the microSD card? Let the box boot first, then insert the card. Prompt appears in seconds.

Illustration: ApplePie UX999 Rocket on a car's console at night

Quick answer

When an ApplePie UX999 Rocket or Ultra, or an Ottocast Picasou 3, shows no update prompt from the microSD card, start the box without the card and insert the card only once it has fully booted; the prompt then appears within seconds. That worked for 4 of 8 owners who reported trying it.

Symptoms

  • You put the update file on the microSD card and the box never asks to update
  • The update prompt flashes up during start-up and disappears before you can tap it
  • On a Picasou 3 the update window hangs, or the box restarts on its old firmware
  • The box reads the card, but the update never starts with any of your cards
  • A short message such as "Copy log file" or "IMEI copied" appears instead of the update

Applies to

Devices
Connection to the car
CarPlay and Android Auto
Highest risk on this page
Advanced
Status
Workaround confirmed by the community

Why it happens

ApplePie UX999 and Ottocast Picasou boxes install firmware from the microSD card themselves, without an update app: when they find a valid file on the card they show a prompt and ask you to confirm. Carlinkit TBoxes work differently, through the FOTA app, as described in update TBox firmware with FOTA.

If the card is already in when the box powers up, the prompt can appear during start-up and be gone before the screen is ready, or not appear at all. Inserting the card into a running box gives the box a fresh card event, and the prompt appears in front of you. When the file itself is damaged, from an interrupted download or a copy through a phone adapter, the box reads the card and does nothing.

Fixes, ranked

Boot the box first, then insert the card

  • Advanced
  • Time: 20–30 minutes
  • Worked for 4 of 8 reports

Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.

  1. Download the update file on a computer and copy it unchanged to the root of a FAT32 microSD card. Do not unzip it and do not put it in a folder.
  2. Keep the file name the maker gives it. For ApplePie that is APM1888.zip on the Rocket and APM1688.zip on the Ultra; the UX999 Rocket hub lists the Rocket and Rocket Q names. Owners’ instructions for the Picasou use update.zip.
  3. Start the box with no card in it and wait until it has fully booted.
  4. Insert the card into the running box. The prompt should appear within a few seconds.
  5. Accept it and keep the box powered until it has installed and restarted.
  6. If the prompt does not appear, or you dismissed it, take the card out and insert it again.

A UX999 Rocket owner found exactly this: with the card in at power-on, the update window appeared and vanished so fast he could miss it; with the card inserted into the running box, the window stayed. A Picasou 3 owner whose update window hung on every attempt inserted the card into the connected, running box, and the update went through.

Two UX999 Ultra owners confirmed the same from their own boxes. One had failed every time he downloaded the file on his phone and copied it to the card; downloaded and copied on a computer, then inserted into the running box, the update was offered at once. One owner explains that if you tap No, the prompt will not come back until you take the card out and insert it again.

Four owners tried this without success. Two of them saw a short message instead of the prompt, “Copy log file” on a UX999 and “IMEI copied” on a Picasou 3: the box had read the card but did not accept the file. One owner also updated a Picasou fine with the card in from the start, after waiting for the box to find the file, so a card already inserted does not always fail.

Copy the update file to the card again from a computer

  • Advanced
  • Time: 15 minutes
  • Worked for 1 of 1 report

Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.

  1. Put the card in your computer and delete the old copy of the update file.
  2. If the file came from a phone or an interrupted download, download it again on the computer and check that it opens as an archive and its size matches the download page.
  3. Copy it to the root of the card, keeping its name.
  4. Insert the card and restart the box, or insert it into the running box as above, and accept the prompt.

A UX999 Ultra owner had restored his box; afterwards it read and formatted the card, but the system update would not start from any of three cards. He was told to copy the file over again, and the box picked the firmware up at the next restart. Another owner adds that firmware copied from a phone through an adapter sometimes turns out corrupt, so copy it through a computer.

Picasou 3 far behind: install the previous build first

  • Advanced
  • Time: 45 minutes
  • Worked for 1 of 2 reports

Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.

  1. Ask Ottocast support ([email protected]) for the previous official build for your Picasou 3, or find it through the Ottocast support hub.
  2. Install that build from the card, inserting the card into the running box.
  3. When it is running, update to the newest build over the air or from the card.

A new Picasou 3 owner tried to go straight to the latest build: the update window hung, or the process started and the box restarted on its old firmware. Starting from the build before it, everything updated. Another owner who installed the earlier build saw no change, and one more needed about fifteen attempts over two days before an update took.

Things to try (unverified)

  • Format the card in the box. One UX999 owner formatted the card in the box and copied the file from a computer to FAT32; neither helped him, so this alone is not a fix.
  • Set the stock launcher before updating. A UX999 Ultra owner asked whether a third-party launcher blocks the prompt; replies thought it unlikely, and switching to the stock one did not help him. It is still good practice before any update; see set the stock launcher before a firmware update.

If nothing works

Note the box model and current firmware version (on the Rocket under Settings → ApplePie Settings), the exact file name on the card, the card size and format, and any message the box shows when you insert the card. A photo of the card’s contents in a file manager helps.

For ApplePie boxes, ask the maker’s support (Exploter, [email protected]) for the right file for your model; for Ottocast, write to [email protected]. The firmware tracker lists the builds owners discuss. If the box refuses every official file for its model, a warranty claim is the honest next step; start here compares the box families.

What owners said

“That helped, thanks. You just have to insert the card while the box is on, then the window appears. If you power on with the card already in, the update window appears and quickly disappears; you can miss it.”
Worked: Insert the card into the running box
Owner, Dec 2024
“It helped. It picked up the firmware right away at the restart. Thanks.”
Worked: Copy the update file to the card again
Owner, ApplePie UX999 Ultra, Jul 2024
“My Picasou 3 arrived and I tried to update straight to the latest firmware […]: the window hung or […] the box just rebooted into the old firmware. I started from the second-to-last one and everything updated fine.”
Worked: Install the second-to-last build first
Owner, Ottocast Picasou 3, Jan 2024

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Should I rename the ApplePie update file to update.zip?

No. Keep the name ApplePie gives it, such as APM1888.zip for the Rocket or APM1688.zip for the Ultra. A Rocket owner who was told to rename it was corrected, and his update started with the original name.

I tapped No on the prompt by mistake. How do I get it back?

Take the card out and insert it again while the box is running. One owner explains that the prompt does not come back on its own until the card is reinserted.

The box showed "Copy log file" or "IMEI copied" and nothing else. Did it update?

No. In the reports with these messages the box read the card but did not start an update. Check that the file is the right one for your model, keeps its name, sits in the root of the card and was copied from a computer.

Parts the fixes above need

  • Product photo from the AliExpress listing: microSD card (32 GB, formatted FAT32)

    microSD card (32 GB, formatted FAT32)

    Local firmware updates, reset files and protocol-switch files are read from a FAT32 card. A high-endurance 32 GB card copes with car heat; pick the 32 GB size.

    AliExpress

Some links above are affiliate links: if you buy through them we may earn a commission at no extra cost to you. It never changes which fix we rank first. Product photos are the sellers' own, from the AliExpress listing. Disclosure.

If none of these fixes work

Try every free fix above first. Each of these needs a car whose screen already runs wired CarPlay or Android Auto. We have not tested them: check the seller's compatibility list for your car and head unit, and that the listing shows the exact model named here, before you buy.

  • Wireless CarPlay / Android Auto adapter (Carlinkit Mini Ultra 3)

    If you only use the box to get CarPlay or Android Auto without a cable, a plain wireless adapter has no Android system to update, overheat or crash.

    AliExpress

  • Replacement AI box (Carlinkit, Android 13, SM6225)

    If the box is out of warranty and still fails after the fixes above, another Carlinkit box keeps your apps on the car screen. It needs wired CarPlay or Android Auto in the car. Pick the NA variant for North American cars, EAU elsewhere.

    AliExpress

  • Carlinkit TBox Ultra (Android 15)

    If an older box is too slow for the apps you run: the TBox Ultra is Carlinkit's Android 15 box, with an SM6350 chip. Check that the variant on the listing supports your car's protocol before buying.

    AliExpress

Affiliate links: we may earn a commission at no extra cost to you. Disclosure.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 6 community reports on ApplePie UX999 Rocket, Ottocast Picasou 3, ApplePie UX999 Ultra.
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (3 cases)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-8650ApplePie UX999 Rocket; Ottocast Picasou 3; ApplePie UX999 Ultra4 worked, 4 did notOwner discussion threads, 25 messages
case-8651Ottocast Picasou 31 worked, 1 did notOwner discussion threads, 6 messages
case-8652ApplePie UX999 Ultra1 workedOwner discussion threads, 6 messages