Apps & launchersReviewed
Connect an OBD2 (ELM327) Adapter to Your AI Box
Pair a Bluetooth ELM327 adapter with the box for Car Scanner or Torque, fix a missing PIN prompt, avoid a flat battery. Picasou 2, 3, TBox Ultra.
Ottocast Picasou 2Ottocast Picasou 3Carlinkit TBox UltraCarlinkit TBox Ultra 2Carlinkit TBox Ultra 3Carlinkit TBox Ultra 4ApplePie UX999 Ultra
Quick answer
On an Ottocast Picasou 2, Picasou 3 or Carlinkit TBox Ultra, a Bluetooth ELM327 adapter pairs in the box's Bluetooth settings with PIN 1234 and then works in Car Scanner or Torque, alongside your phone; five of seven owners who reported trying got data this way. Unpair it before parking if your car stops sleeping.
Before you start
- A Bluetooth ELM327 OBD2 adapter (for a TBox Ultra, one that supports Bluetooth Low Energy)
- An OBD app such as Car Scanner or Torque Pro installed on the box from Google Play
- The car's OBD2 port, usually under the dashboard on the driver's side
Time: about 15 minutes. Tools: ELM327 OBD2 adapter.
Applies to
- Devices
- Connection to the car
- CarPlay and Android Auto
- Highest risk on this page
- Low risk
What the adapter does on the box
An ELM327 adapter plugs into the car’s diagnostic (OBD2) port and passes engine data over Bluetooth: coolant temperature, battery voltage, gearbox temperature, fault codes. On a phone you would read it with Car Scanner or Torque. The AI box runs the same Android apps, so the readings can sit on the car screen next to your navigation, for example in split screen.
The box pairs with the adapter as one more Bluetooth device. Your phone’s connection to the box is separate and keeps working; one owner who explained it pointed out that some boxes even use one Bluetooth module for the phone and another for accessories such as an OBD adapter.
Adapters are cheap clones of one chip design, and the clones vary. If yours pairs with a phone but not with the box, the adapter itself is the first suspect.
Steps
Pair the adapter and pick it in the OBD app
- Low risk
- Time: 10 minutes
- Worked for 5 of 7 reports
- Plug the adapter into the OBD2 port and switch the ignition on.
- On the box open Settings → Bluetooth and scan for new devices.
- Tap the adapter. It usually shows as OBDII, OBD2 or the adapter’s brand.
- Enter the PIN when asked. It is usually 1234.
- Open the OBD app, set the connection type to Bluetooth and choose the paired adapter.
- Connect in the app and check that live values such as coolant temperature appear.
An Ottocast Picasou 2 owner paired an ELM327 this way with the phone connected at the same time and got data straight away, and a Picasou 3 owner reported the same. Two TBox Ultra owners also got live readings, one in Car Scanner Pro and one in a gearbox diagnostics app that reconnects by itself every drive. A fifth owner, in a Hyundai Ioniq 5 with a box he did not name, runs Car Scanner on the adapter without trouble while his phone stays tethered to the box over Bluetooth. A Subaru WRX owner also describes Torque gauges on a TBox Plus from a Bluetooth adapter, without saying how he paired it.
The two owners for whom it did not work both had a TBox Ultra: the adapter showed up in the Bluetooth list but failed to connect, and the PIN window never appeared. The next step is for that case.
On a TBox Ultra with no PIN prompt, use a Bluetooth Low Energy adapter
- Low risk
- Time: 10 minutes
- Worked for 1 of 1 report
- Get an ELM327 adapter that supports Bluetooth Low Energy (BLE). These are usually sold as compatible with iPhone, because iPhones only connect to OBD adapters over BLE.
- Do not pair it in the box’s Bluetooth settings.
- In the OBD app’s connection settings choose Bluetooth LE (BLE) and select the adapter there.
- Connect and check the readings.
A TBox Ultra owner explained why their classic adapter never connected: it needs a PIN, and the Ultra never shows the PIN entry window. The same adapter supports BLE, and over BLE it connected without problems and read data normally.
If the app never finds one adapter, try another
- Low risk
- Time: 10 minutes
- Worked for 1 of 1 report
- Check that the adapter works with your phone and the same app. If it does not, the adapter or the car’s port is the problem, not the box.
- If it works with the phone but not with the box, delete it from the box’s saved Bluetooth devices.
- Pair a different ELM327 adapter, ideally another model, and select it in the app.
A Picasou 2 owner had three ELM327 adapters that all worked with a phone and with another box. Only one of the three connected to the Picasou 2. The owner who started that discussion, on the same model, found the same: a second adapter connected where the first never appeared in Car Scanner.
Stop the adapter from draining the car battery overnight
- Low risk
- Time: 2 minutes
- Worked for 1 of 1 report
- Before you switch off and lock the car, exit the OBD app with its own exit or disconnect option, so the connection closes.
- If the car still does not go to sleep, unpair the adapter from the box when parked, or unplug the adapter from the OBD2 port.
- If you want the adapter left in the port permanently, pair it only with your phone instead of the box.
Normally the car cuts power to its USB port a few minutes after you lock it, and the box switches off. With the adapter connected to the box, the adapter keeps talking to the car’s modules, so the car stays awake, the USB port stays on and the box keeps the connection alive. One owner drained the battery overnight this way. The car slept as soon as the Bluetooth link to the adapter was broken. Powering the box from a socket that switches off with the ignition also let that car sleep.
How a car reacts varies. Another owner left the adapter plugged in and connected through a winter down to −28 °C (−18 °F) without a starting problem, and owners of the same car model reported opposite results. Test yours: lock the car with the box connected and check after 20 minutes that the box’s lights are off.
If Bluetooth is off after every start, switch it on with MacroDroid
- Low risk
- Time: 10 minutes
- Worked for 1 of 1 report
- Install MacroDroid from Google Play on the box.
- Tap Add macro and choose the trigger Device boot.
- Add the action that sets Bluetooth to Enable (under MacroDroid’s connectivity actions).
- Save the macro and grant the permissions MacroDroid asks for.
- Restart the box and check that Bluetooth comes on, and the phone and adapter connect, without touching anything.
On an ApplePie UX999, after the update from Android 13 to Android 16, Bluetooth stayed off after every start, so neither the phone nor the OBD adapter connected automatically. Another owner saw the same. The first owner reported that a MacroDroid macro solved it. The same app can switch on the hotspot at boot; see turn on the hotspot automatically.
Verify it worked
- The OBD app shows live values that change: the coolant temperature rising as the engine warms is the clearest check.
- The phone is still connected to the box and the car screen still shows CarPlay or Android Auto.
- After you lock the car, the box switches off within the usual few minutes.
Undo / rollback
- To remove the adapter, open Settings → Bluetooth on the box, tap the gear or info icon next to it and choose Forget or Unpair.
- Unplug the adapter from the OBD2 port.
- To remove the MacroDroid macro, open MacroDroid, long-press the macro and delete it, or uninstall MacroDroid.
Troubleshooting this guide
The adapter appears in the list, you tap it, and nothing seems to happen. A Picasou 2 owner in this situation was told to switch off Bluetooth on the phone, delete the adapter from the box’s saved devices and pair it again. The owner did not report the result, so treat it as unverified.
A Carlinkit box says there is a Bluetooth problem when the app connects. One owner suggested pairing the adapter first in the box’s own Bluetooth phone app, the one you used to pair the phone, and only then connecting from the OBD app. Unverified.
You want the adapter switched off when the car is parked. One owner uses an adapter with a power button on its case together with Car Scanner Pro, which removes the question of whether it keeps the car awake. Nobody reported comparing it with an ordinary adapter.
The app worked and then the adapter disappeared after a launcher reinstall or firmware update. Forget the adapter in the box’s Bluetooth settings and pair it again from the first step. Other connection problems are collected on the apps symptom page, and power problems on the power symptom page.
What owners said
“When the scanner is plugged into the OBD port and the software is running, my car doesn't go to sleep, even with the alarm set. If I break the Bluetooth connection to the scanner, it sleeps.”
Owner, Dec 2025
“My ELM won't connect over Bluetooth because it needs a PIN, and the Ultra doesn't show the prompt. The same dongle connects over BLE without problems.”
Owner, Nov 2025
“I connected it with a P3; everything works fine.”
Owner, Ottocast Picasou 3, Mar 2025
Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.
Questions owners ask
Will the phone still connect to the box when the adapter is paired?
Yes. Owners on the Picasou 2 and Picasou 3 used the adapter and the phone at the same time. Bluetooth handles several devices, and the box keeps its phone connection separate.
Which app should I use?
Owners mostly use Car Scanner or Torque Pro from Google Play; some use a diagnostics app made for their car's gearbox. Any app that talks to an ELM327 adapter over Bluetooth works the same way on the box as on a phone.
Can I leave the adapter plugged in all the time?
It depends on the car. One owner left it plugged in through a winter without trouble; another found the car never went to sleep while the box stayed connected and woke to a flat battery. Test it on a weekend before relying on it.
Does a Wi-Fi ELM327 adapter work too?
Owners in this guide used Bluetooth adapters. A Wi-Fi adapter makes the box join the adapter's own network, which normally takes the place of the Wi-Fi connection the box uses for the internet.
Related fixes
Did this work for you?
Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.
Send a reportChangelog
- Last reviewed against new community reports:
- Confirmed by 9 community reports on Ottocast Picasou 2, Ottocast Picasou 3.
- Page updated:
"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.
Evidence behind these counts (6 cases)
One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.
| Case | Confirmed on | Result | Source |
|---|---|---|---|
| case-8850 | Ottocast Picasou 2; Ottocast Picasou 3 | 4 worked, 2 did not | Owner discussion threads, 10 messages |
| case-8851 | Model not stated | 1 worked | Owner discussion threads, 3 messages |
| case-8852 | Ottocast Picasou 2 | 1 worked | Owner discussion threads, 2 messages |
| case-8853 | Model not stated | 1 worked | Owner discussion threads, 5 messages |
| case-8854 | Model not stated | 1 worked | Owner discussion threads, 3 messages |
| case-2097 | Any Android AI box | 1 worked | Owner reviews, 1 message Reddit thread |