Skip to content
AI Box Fix

TEYES head unitsReviewed

TEYES External Microphone Ignored or Silent on Calls

Callers hear you badly through a TEYES head unit with an external microphone? Move the microphone slider to external, then check the plug and CarLink.

Illustration: TEYES CC3 2K in a car dashboard on an open road

Quick answer

On a TEYES head unit, an external microphone is ignored until the microphone slider in the unit's settings is moved from the built-in microphone to the external one. That worked for seven of the nine TEYES owners who reported trying it, CC3 2K, CC3 and CC3L owners among them. Check the result with a recorder app before a test call.

Symptoms

  • Callers say you sound distant or quiet although an external microphone is fitted
  • The unit's voice assistant picks up your commands poorly from the driver's seat
  • The external microphone is silent from the moment you plug it in
  • The external microphone works on ordinary Bluetooth calls but not on CarPlay calls
  • The external microphone worked for a while and then stopped

Applies to

Head unit
TEYES: CC3 2K, CC3, CC3L
Setup
Phone → TEYES unit
Phone projection
CarPlay and Android Auto
Highest risk on this page
Advanced
Status
Workaround confirmed by the community

Why it happens

A TEYES unit has a microphone built into it and a lead for an external one. Owners describe a slider in the unit’s settings that selects one or the other, never both. While the slider stays on the built-in microphone, an external microphone that is plugged in does nothing, and callers and the voice assistant keep hearing you through the unit in the dash.

Three other things break the path. The plug: one owner needed an adapter plug from the box, another found that the plug made contact only when pulled back a little, and a third had a connector near the unit that had lost contact. The phone-link app: CarLink has its own microphone setting for CarPlay calls, so an external microphone can work on an ordinary call and not in CarPlay.

The last one has no setting behind it. On some units the slider is not obeyed: two owners report that the built-in microphone stayed on whichever way they set it.

Where is the fault?

Run these checks in order. Each one clears one device, so you only work on the part that fails.

One test per device in the chain between the phone and the car screen
CheckTry thisWhat it tells you
PhoneEnd the connection to the unit and make the same call holding the phone.If the other party still hears you badly, the fault is the phone or the network, and nothing on this page applies.
TEYES unitOpen a voice recorder or a microphone test app on the unit. Record a few words with the microphone slider in one position, then in the other.Two recordings that sound different show that the slider switches microphones. No difference: the slider is not obeyed, or the external microphone does not reach the unit.
External microphone and plugWith the slider on the external microphone, record while you speak close to that microphone, then again while you ease its plug in and out a little.A quiet recording that turns loud as the plug moves points to the plug or the connector: fixes 3 to 5.
Projection appMake one ordinary Bluetooth call and one call inside CarPlay, and ask the other party to compare them.Good on the ordinary call and bad only in CarPlay: the microphone setting inside CarLink, fix 2.

Not sure what an AI box would add to an Android head unit? See AI box or Android head unit.

Fixes, ranked

Move the microphone slider to the external microphone

  • Advanced
  • Time: 5 minutes
  • Worked for 7 of 9 TEYES owners

Warranty warning: this uses developer or engineering access. Follow the undo steps afterwards; some sellers refuse warranty claims on units with debugging left enabled.

  1. Open Settings on the head unit and look at the bottom of the list for the microphone slider.
  2. If it is not there, open the Factory settings menu, enter the code 168 and look at the bottom left of that screen.
  3. Move the slider to the external microphone.
  4. Open a voice recorder or a microphone test app on the unit and record a few words, to check that the built-in microphone is off.
  5. Make a test call and ask the other party how you sound.

Seven TEYES owners got their external microphone working this way. Three name the CC3 2K; one of them had searched the menus for 25 minutes before another owner showed him the bottom-left slider. A CC3L owner found the slider at the bottom of the settings, and a CC3 owner says the slider on his unit turns the built-in microphone off. Two more did not name their family; one of them has a unit from 2025.

The longest report is from a CC3 2K owner with an ordinary lavalier microphone on the left pillar. He checked with a microphone test app that the built-in microphone was fully off, and for a while asked everyone he called how he sounded. He has used it for more than two years without raising his voice.

Where the slider sits differs between reports. Most owners write “in settings”; only one, who reached it through the Factory settings menu, spells out the code 168. That menu is why this fix carries the Advanced label. Change nothing else in it.

It did not work for everyone. Two owners report that the slider is there and the built-in microphone stays on; one of them has a CC3. A member says the slider is obeyed only on boards made after March 2023, which no owner has confirmed. Both of those owners ended up opening the unit to disconnect the built-in microphone. That is outside any warranty and is not a fix this page recommends: talk to the seller first.

One more owner proved with a recorder that the slider switched microphones and that the external one was loud, yet his callers still heard him poorly. He got no answer and is not counted above. The echo and sensitivity item under “Things to try” is the nearest lead for that case.

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 2 TEYES owners
  1. Start the CarLink app on the head unit.
  2. On its start screen, press the settings button among the buttons on the right.
  3. Choose the driver position, left or right, for the side the driver sits on.
  4. Start CarPlay and make a test call.

One CC3 2K owner chose the driver position there (he picked left), and his external microphone started working. He was answering an owner whose external microphone worked on ordinary calls with an Android phone, while CarPlay went back to the built-in one.

For that second owner the setting changed nothing. It was already on left; set to right, callers could not hear him at all. On his unit the item is labelled noise reduction, not driver position. That leaves one report for and one against. If CarLink itself is hard to find on your unit, see how to start CarPlay or Android Auto on a TEYES unit.

Fit the adapter plug from the box

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. Look in the box for a small adapter plug.
  2. Fit it between the microphone’s plug and the unit’s microphone lead.
  3. Record a few words or make a test call.

One owner plugged the microphone straight in and it did not work. He then found a plug in the box, fitted it, and everything worked. He did not name his family.

Pull the microphone plug back a little

  • Low risk
  • Time: 5 minutes
  • Worked for 1 of 1 TEYES owner
  1. Find where the microphone’s plug goes into its socket.
  2. Pull the plug back slightly, so that it is not pushed fully home.
  3. Record a few words or make a test call.

One owner’s microphone was silent with the plug pushed in the usual way and worked once he pulled it out a little. That is how he runs it. He did not name his unit, and no owner confirmed why the plug behaves like this. If you want a plug that sits fully home, ask the seller about the microphone and the lead.

Re-seat the microphone connector near the unit

  • Low risk
  • Time: 15 minutes
  • Worked for 1 of 1 TEYES owner
  1. Find the microphone connector on the lead near the head unit. If it sits behind the unit, the unit has to come out of the dash; leave that to the installer if you did not fit it yourself.
  2. Pull the connector apart and push it together again until it is fully seated.
  3. Make a test call.

One owner’s digital microphone stopped working. The plug near the head unit was pulled out and pushed back in, and the test call that followed worked. His seller told him the fault is a known one, and he adds that such connectors are replaced under warranty, so report it to your seller even when re-seating cures it.

In another thread a member advised checking that no pin has slipped back in the connector block and that both connectors click together. Nobody reported a result for that check.

Things to try (unverified on TEYES)

  • In CarPlay the other party or the voice assistant cannot hear you, and only the built-in microphone is fitted. The suggestion was to turn the external-microphone switch off; no TEYES owner reported a result.
  • The caller hears an echo. The suggestions were to select the external microphone in the sound settings and turn the echo setting down; one member runs microphone sensitivity 12 and echo 10. The owner who asked now has clear calls with echo left at 10 and the microphone by the sun visor, 30 to 35 cm from him, but he did not say what he changed, so no TEYES owner has confirmed a fix.
  • What AI box owners report. On an AI box the microphone is the car’s own and the causes are different: see microphone not working on calls. Those reports are about a different device, and none of them is counted here.

If nothing works

Write down the family, the screen size and memory version, the unit’s ID from Settings, System, and the firmware version. Add which microphone you fitted and where, whether the slider changes anything in a test recording, and whether the fault shows on ordinary calls, in CarPlay or in both. Record a short call in which the other party says what they hear.

Send that to the store you bought from; the maker’s regional store has a support page. If the slider is not obeyed on your unit, say so in those words: the two owners in that position found no setting that helped. When no setting and no plug brings the external microphone to life, a warranty claim on the lead, the microphone or the unit is the honest answer.

If calls have no sound in either direction, the fault is not the microphone: start with TEYES Bluetooth: phone not found, no reconnect or no sound.

What owners said

“I fitted an ordinary lavalier microphone on the left pillar. I switched [the built-in one] off with the slider in the settings, CC3 2K unit. I installed a microphone test app and checked the built-in one switches off completely.”
Worked: Microphone slider set to external
Owner, TEYES CC3 2K, Nov 2025
“When you open the CarLink app there are buttons on the right: press Settings and choose the driver position (left or right). After that my external microphone started working on the CC3 2K.”
Worked: Driver position in CarLink settings
Owner, TEYES CC3 2K, Aug 2024
“Don't push the microphone plug all the way into the socket. That's how it is on mine: pushed in properly, the microphone is silent; pulled out a little, it works.”
Worked: Pull the plug back a little
Owner, Nov 2023

Quotes are translated where needed and shortened ([…]); names are removed. Full counts are in the evidence table below.

Questions owners ask

Where is the microphone switch on a TEYES unit?

Owners describe one slider that selects either the built-in or the external microphone. A CC3L owner found it at the bottom of the settings. One owner reached it through the Factory settings menu with code 168, at the bottom left of that screen.

Does the microphone slider work on every TEYES unit?

No. Two TEYES owners report that the slider is there but the built-in microphone stays on; one of them has a CC3. A member says only boards made after March 2023 obey it, and no owner has confirmed that date.

How do I check which microphone the unit is using?

Record a few words with a voice recorder or a microphone test app on the unit, once in each slider position. If the two recordings sound the same, the slider is not switching, or the external microphone is not reaching the unit.

Why does the external microphone work on normal calls but not in CarPlay?

The CarLink app has its own setting, shown as driver position or noise reduction. One CC3 2K owner got the external microphone working in CarPlay by choosing the driver position there; for a second owner the same setting changed nothing.

Did this work for you?

Tell us which fix worked (or didn't), with your box, firmware date and car. Reports are how fixes get confirmed and re-ranked.

Send a report

Changelog

  • Last reviewed against new community reports:
  • Confirmed by 11 community reports on TEYES CC3 2K, TEYES CC3, TEYES CC3L, TEYES head unit (model not stated).
  • Page updated:

"Confirmed" means a community member reported that the fix worked on their unit. We have not tested it on our own hardware. How we verify.

Evidence behind these counts (5 cases)

One row per case: a device, a symptom and a fix, merged from owner reports. An owner counts once per fix. Reports with no outcome yet are not counted. Forum and chat message references are kept on file but not published, to protect owners' privacy; public Reddit and YouTube sources are linked.

CaseConfirmed onResultSource
case-1332TEYES CC3 2K; TEYES CC3; TEYES CC3L; TEYES head unit (model not stated)7 worked, 2 did notOwner reviews, 17 messages
case-1333TEYES CC3 2K1 worked, 1 did notOwner reviews, 3 messages
case-1334TEYES head unit (model not stated)1 workedOwner reviews, 2 messages
case-1335TEYES head unit (model not stated)1 workedOwner reviews, 2 messages
case-1336TEYES head unit (model not stated)1 workedOwner reviews, 4 messages