Skip to content
AI Box Fix

Peugeot, Citroën, Opel NAC / SMEG (Peugeot, Citroën) · IntelliLink (Opel) / reviewed 11 Nov 2026

AI Box on Peugeot, Citroën and Opel: What Works

AI box in a Peugeot, Citroën or Opel (NAC, SMEG): which protocol to run, the SMEG green-strip firmware rollback, PSA pinch-zoom, car GPS and calls.

What works

A wired AI box works on most of these cars, but which head unit you have decides how it behaves, so settle that first.

  • NAC is the PSA touchscreen in the Peugeot 3008, 5008 and 508, the Citroën C5 Aircross and SpaceTourer, and the Grandland X that Opel built on the same platform. It takes wired CarPlay and wired Android Auto, so an ordinary wired box runs. Owners report working set-ups on it with the MGears Mstick4 (a Peugeot 5008 2020 owner says it “works perfectly”), the Carlinkit TBox Ambient and TBox Plus, the Carlinkit TBox Ultra and the Ottocast Picasou 3 Pro.
  • SMEG is the older 800x480 Citroën unit (the C4 sedan). A Carlinkit TBox runs on it, with the firmware caveat in the first quirk below.
  • Opel’s own units are GM, not PSA. On a 2014 Insignia one owner runs a Carlinkit TBox Ambient; that car behaves differently from the PSA cars and has its own section below. The Astra K and Insignia are too thin in owner reports to say more.

On a Citroën SpaceTourer one owner moved from a Carlinkit TBox Ambient to an Mstick4 and reports it running well, once he had sorted the pinch-zoom quirk below. The practical rule across these cars: on a NAC unit run the box in whichever protocol your screen offers, and if both are offered, note that auto-start and the car’s own call handling do not behave the same in each — the quirks below say how.

Known quirks

The SMEG screen gets a flickering green strip after an update

What owners saw: on a Citroën C4 sedan with the 800x480 SMEG unit, a Carlinkit TBox began running a “calibration” every time it connected and set the screen to 800x456, leaving a green strip flickering along the bottom. One owner found Carlinkit changed something from around September 2023 so the builds misread the screen height as 456 instead of 480, and no display-mode or DPI change in developer options helped.

What fixed it: going back to the 25 Aug 2023 build, the last one that reads the screen correctly. Two owners reported the rollback works — one calls the result “perfect” and has done it four times across the later builds, the other, who first saw the strip after the 19 Oct 2023 update, reported only “rolled back, it helped.” Later Carlinkit builds did not fix it, and the owner who contacted support got nowhere.

Pinch-zoom needs activating in the car before any box can do it

What owners saw: on a Citroën SpaceTourer (and PSA cars generally), two-finger pinch-zoom on the box’s maps did nothing at first.

What fixed it: one owner reported that multitouch had to be switched on in the head unit itself, with a dealer connection or the PSA diagnostic tool, before the box could pass a pinch through. His test for whether your car is ready: open the car’s own built-in navigation and try to pinch-zoom its map — if that works, the box will pinch-zoom too; if it does not, the car is not sending multitouch and no box setting will add it. This is the step before the box-side switch on enable multitouch on a TBox: on these cars the head unit has to allow it first.

The NAC head unit draws a frame around the picture

What owners saw: on NAC cars (a Peugeot 5008 owner on a TBox Ultra, confirmed by a second Peugeot owner on the same unit) CarPlay and Android Auto appear inside a fixed frame, with black bands at the sides, and the box’s picture cannot be stretched to fill the screen.

What owners found: the frame cannot be hidden. One owner who asked was told only the next-generation PSA screen, the IVI unit, drops the frame; on NAC it is built in. There is no box-side setting for it, so treat it as a property of the car, not a fault in the box.

Peugeot 3008: the car-GPS option makes the position lag

What owners saw: on a Peugeot 3008 with a TBox Ambient, turning on the car-GPS (OEM GPS) option left the position barely moving, 30 to 60 seconds behind the car.

What fixed it: one owner turned the car-GPS option back off, so the box used its own receiver, and “everything worked.” The OEM GPS switch and when it helps are covered on inaccurate GPS on an AI box; on this car the switch belongs off.

Peugeot 508: the steering voice button opens the car’s assistant, not yours

What owners saw: on a Peugeot 508 i-Cockpit with a TBox Plus, a short press of the steering-wheel voice button always opened the car’s own assistant, even with the box in Android Auto mode.

What one owner does: hold the button down, which opened Google Assistant on the box and worked well. Two limits he noted: it plans routes in Google Maps rather than your preferred navigation app, and it dials over the SIM in the box, not the phone. The general version of this, and how to point the button at another assistant app, is on the steering-wheel voice button page.

Opel Insignia (2014): calls and GPS trade off between the two modes

What owners saw: on a 2014 Opel Insignia with a TBox Ambient, one owner found the two protocols each give up something.

  • In Android Auto mode the car still sees his Android phone over Bluetooth, so the cluster’s phone tab and the steering-wheel buttons place calls through the car, but the car-GPS option does not work, so the box uses its own receiver.
  • In CarPlay mode the car-GPS option works, but the phone will not pair to the car; a call reaches the box, yet neither side can be heard.

What he settled on: Android Auto mode, keeping the car’s hands-free and the box’s own GPS. Keeping calls on the car’s Bluetooth with a box is covered on car Bluetooth calls with an AI box, and switching the box’s mode on switch between CarPlay and Android Auto.

Auto-start works only in CarPlay mode

What owners saw: on a Citroën C5 Aircross the box’s own interface starts by itself only in CarPlay mode; in Android Auto you have to tap the Android Auto tile each time. One owner confirmed it on a Carlinkit box and noted not every car supports auto-start — his does it only in CarPlay. The same owner on an Mstick4, which works only in Android Auto and has no CarPlay mode to fall back on, has to tap the tile at every start, though the stick then loads faster than the Carlinkit box did “automatically.” The protocol switch is on switch between CarPlay and Android Auto.

Other things owners ran into

These are single reports with no confirmed fix; note them if they match your car.

  • Peugeot 5008, CarPlay mode: opening a passenger door makes the box reboot and come up with no mobile network. An owner was told switching to Android Auto cured the same thing on other makes, but he chose to leave it.
  • Peugeot 3008, TBox Plus: when the mobile signal drops the box reboots repeatedly; switching on airplane mode stops the cycle. A new power cable and firmware did not fix it for the owner. The general causes are on AI box keeps rebooting.
  • Peugeot 3008: the box takes a while to connect from a cold start after ignition, but only about 15 seconds if you replug it once the car is already on; one owner put this down to the 3008’s infotainment.
  • Peugeot, Carlinkit TBox with a SIM: the map in the box’s own Google Maps and Waze cannot be zoomed: two-finger zoom does nothing and the apps show no + and − buttons, which one owner gets only with his phone’s Android Auto. He has no fix; the pinch-zoom section above has the check to run on the car first.
  • Peugeot 5008 II, Ottocast Picasou 3 Pro: everything works in both protocols except controlling phone calls with the car’s stock steering-wheel buttons. Two owners on this car reported it, with no fix.

Before you connect a box

  • Find out which head unit you have. NAC (Peugeot 3008/5008/508, Citroën C5 Aircross/SpaceTourer, Grandland X) takes wired CarPlay and Android Auto; the older Citroën C4 has the 800x480 SMEG; an Opel Insignia or Astra K has a GM unit that behaves differently.
  • On SMEG, mind the firmware. If you see a flickering green strip at the bottom, you are on a Carlinkit build after 25 Aug 2023; go back to that build.
  • Expect the frame on NAC. The black bands around the picture are built into the head unit and cannot be removed.
  • Check pinch-zoom in the car’s own maps first on a PSA unit; if they do not pinch, the box will not either until the car’s multitouch is activated.
  • Know your box. Which TBox do I have shows how to read the model and firmware date in Settings → About, which you will need to ask for the right firmware file.

If something breaks

Write down the box model and firmware date (Settings → About), the car make, model and year, the head unit (NAC, SMEG, IntelliLink) and its software version, the box’s mode (CarPlay or Android Auto), and whether a phone works on the same USB port in the same mode. Note when it fails: every start, only after a door was opened, only after an update, or only when the mobile signal drops. A short video of the screen helps.

Send box-side faults to the box maker’s support (Carlinkit: [email protected]; Ottocast: [email protected]); how to report a bug has a template. If a phone is also refused on the same port, the head unit is the problem; if a China-market C5 Aircross or 5008 offers only Baidu CarLife rather than CarPlay, see a head unit with only CarLife. Whether a car supports a box at all is covered in start here.

Public sources

Owner reports behind this page that are public and can be opened. Reports from owner forums and chats are kept on file but not linked, to protect owners' privacy.

  1. YouTube video, Nov 2025: owner report (Carlinkit TBox Plus)